Home page

Aluminum Wheel Polishing

Forum: Corvette Car Care

5 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

Aluminum Wheel Polishing

Posted: 3/31/03 12:05pmMessage 1 of 5
b
Former Member
Send PM
DACULA, GA - USA
Joined: 3/28/2003
Posts: 62
Vette(s): 1978 Silver Anniversary Edition
I am also trying to restore the shine to my 78 aluminum wheels and I need some advice. I hand rubbed them with Mother's aluminum polish and they look much better, but nowhere as nice as I have seen on some. Plenty of black residue when I rubbed them with the paste. Would you also recommend using a linen pad on a drill and what type of polish should I use with it?

Barry
Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

Aluminum Wheel Polishing

Posted: 3/31/03 5:54pmMessage 2 of 5
4
Lifetime Member
Send PM
Joined: 2/12/2002
Posts: 279
Vette(s): 1982 blue cpe AFR HEADS 4 DCOE WEBER CARBS, CAM TECHNIQUES, msd , on board ign control and lots of other mouse food
The buffing wheel will do the trick ,,,, some folks tend to like one polish more than another . Get a polish intended for aluminum that is not clear coated ie mothers ,etc

geo |thumb|
Be the first to like this post
Sign In to Like this post

Aluminum Wheel Polishing

Posted: 3/31/03 11:31pmMessage 3 of 5
J
Former Member
Send PM
BRANDON, FL - USA
Joined: 5/28/2002
Posts: 63
Vette(s): 1982 COUPE
Barry,
If can get some aluminum wheel acid from a detail shop or supplier and wash your wheels with that first it take a lot of the oxidation off. Then come behind that with a edge wheel and your polish. Wenol makes a real good cleaner and polish. Good luck it takes times. |thumb|
Be the first to like this post
Sign In to Like this post

Aluminum Wheel Polishing

Posted: 4/1/03 12:11pmMessage 4 of 5
b
Former Member
Send PM
DACULA, GA - USA
Joined: 3/28/2003
Posts: 62
Vette(s): 1978 Silver Anniversary Edition
Thanks for the help! Is an Edge Buffer the buffing attachent for a 3/8 drill that only has the buffer on the sides? What type of cover is best to use on the wheel?
Be the first to like this post
Sign In to Like this post

Aluminum Wheel Polishing

Posted: 4/4/03 2:58pmMessage 5 of 5
J
Former Member
Send PM
BRANDON, FL - USA
Joined: 5/28/2002
Posts: 63
Vette(s): 1982 COUPE
Barry,
An edge is the buffing wheel that you are speaking off. You can get them at Home Depot in a get that comes with compound and polish or just the wheel itself. It is a cotton cover and does a real fine job. |thumb|
Be the first to like this post
Sign In to Like this post
Share:

in Forum: Corvette Car Care


Sponsored Content