Sponsored Content
Local Chev dealer changed my blades and on the ones installed, the inside blade sticks under the hood. Apparently they put in the wrong type. I bought some from a "Vette" site and they also stick. Any suggestions??
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
B
Free Member
Moderator
Send PMModerator
Joined: 3/20/2009
Posts: 690
Vette(s): Black 1979 L-82
Black 1996 LT1
Black 1999 Coupe
Yep...same here.
When they did away with wiper refills this problem came about.
You can:
A.--adjust your hood taller.
B.-- slightly grind the top of the wiper arm connecting clip.
C.--a little of both A/B
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
trats-N-Vettes said:
Yep...same here.
When they did away with wiper refills this problem came about.
You can:
A.--adjust your hood taller.
B.-- slightly grind the top of the wiper arm connecting clip.
C.--a little of both A/B
No, no, no! All you guys need is the correct wiper blades! There shouldn't be any need to grind anything! It's pretty amazing that a Chebby Store wouldn't know what they're doing! The Trico 20-2 is the blade you need for the '84-'94 Corvette. The '95-'96 need the Trico 20-3.
I use Michelin "High Performance" 20". They are also low profile.
(modified large image to link-aapple)
|UPDATED|3/11/2018 6:36:13 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
B
Free Member
Moderator
Send PMModerator
Joined: 3/20/2009
Posts: 690
Vette(s): Black 1979 L-82
Black 1996 LT1
Black 1999 Coupe
Hot Rod Roy said:
No, no, no! All you guys need is the correct wiper blades! There shouldn't be any need to grind anything! It's pretty amazing that a Chebby Store wouldn't know what they're doing! The Trico 20-2 is the blade you need for the '84-'94 Corvette. The '95-'96 need the Trico 20-3.
I use Michelin "High Performance" 20". They are also low profile.
trats-N-Vettes said:
Yep...same here.
When they did away with wiper refills this problem came about.
You can:
A.--adjust your hood taller.
B.-- slightly grind the top of the wiper arm connecting clip.
C.--a little of both A/B
No, no, no! All you guys need is the correct wiper blades! There shouldn't be any need to grind anything! It's pretty amazing that a Chebby Store wouldn't know what they're doing! The Trico 20-2 is the blade you need for the '84-'94 Corvette. The '95-'96 need the Trico 20-3.
I use Michelin "High Performance" 20". They are also low profile.
(modified large image to link-aapple)
yes yes yes!
The info I posted was for him continuing to use his current, recently purchased arm/blades.
I can also tell you that none of the part houses here carries what you mentioned (in stock).That leaves online ordering for many.
If the OP wants to order another set, post up a part number for him and others.Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C4 General Discussion
Sponsored Content