Home page

1989 Coupe Six Speed Problem

Forum: C4 Engines, Driveline and Handling

5 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

1989 Coupe Six Speed Problem

Posted: 4/30/09 7:03pmMessage 1 of 5
Profile Pic
Lifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1456
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition
Good when on pedal in 6th gear. When decelerating, huge vibration. Thoughts? Trying to help a friend.

Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

1989 Coupe Six Speed Problem

Posted: 4/30/09 7:33pmMessage 2 of 5
B
Free Member
Moderator
Send PM
Joined: 3/20/2009
Posts: 690
Vette(s): Black 1979 L-82 Black 1996 LT1 Black 1999 Coupe
U-joints checked?
Be the first to like this post
Sign In to Like this post

1989 Coupe Six Speed Problem

Posted: 4/30/09 8:21pmMessage 3 of 5
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Jim, does it only do this in 6th? That would indicate an internal trans problem, but that's a long-shot. The ZF units are pretty bullet proof normally. They do have a LOT of gear rattle, due to the size of the gears, and the clearance needed for them. Can't say that I've ever heard of one that would create a vibration only in one gear, tho...
Otherwise, I'd agree with the u-joints being the issue, either on the driveshaft itself, or one of the halfshafts. Might check the torque on the halfshaft nut in the center of the rear hubs. That can cause some wierd vibs.

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

1989 Coupe Six Speed Problem

Posted: 5/2/09 2:09pmMessage 4 of 5
Profile Pic
Lifetime Member
Send PM
Gloucester, VA - USA
Joined: 1/29/2005
Posts: 1456
Vette(s): 1979 T-Top, Metallic Green ZZ4 350/355 hp 405 ft/lbs torque Dual Spal Fans 700R4 4 Spd O/D Transmission 2004 Z06 Commemorative Edition
Only in 6th...and only coming off the gas

Lifetime Member #73

The Money Pit.... and my niece

(click to see a slightly larger version)

Be the first to like this post
Sign In to Like this post

1989 Coupe Six Speed Problem

Posted: 5/2/09 7:56pmMessage 5 of 5
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
Sounds like time for tranny werk...
Before digging any deeper, tho, I would first pull the driveshaft, and check the yoke, and the tailhousing bushing, to see if there was any major wear....

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post
Share:

in Forum: C4 Engines, Driveline and Handling


Sponsored Content