Home page

shock replacements

Forum: C4 Electrical, Body and Interior

6 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

shock replacements

Posted: 4/12/12 8:03amMessage 1 of 6
t
Free Member
Send PM
Pickens, SC - USA
Joined: 7/21/2009
Posts: 25
Vette(s): 1989 Red,convertible,sold an 78 Black coupeSilver Anniversary after 3 years.
I'm planning on replacing the Bilistien shocks on my 89 CONVERTIBLE(different p/n?).
Has anybody had good luck with KYB aftermarkets? I'm getting a REAL harsh/bumpy ride now and if those stock replacements do the same I really don't want them.
I've had to drop 10-15 psi in the tires to keep things from shaking loose!
Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

Re: shock replacements

Posted: 4/12/12 12:15pmMessage 2 of 6
Profile Pic
Free Member
Send PM
Joined: 12/7/2011
Posts: 219
I replaced the entire spring and shock package with Vette Brakes sport set-up which came with stiffer springs and shocks. I took the rear shocks right back off because they were just too stiff even though I kept both front and rear springs. Front shocks were a little stiffer but not like the rears. It would bounce the rear-end right off the ground going over rail road tracks.  I eventually traded all that stuff away when I went to coil over double adjustables. You might want to talk to Bilstein about ones that are valved like the OEMs.
Be the first to like this post
Sign In to Like this post

Re: shock replacements

Posted: 4/15/12 5:03amMessage 3 of 6
e
Lifetime Member
Send PM
Lanoka Harbor, NJ - USA
Joined: 12/21/2006
Posts: 2191
Vette(s): 1975 metallic blue coupe with t-tops,L48, t/t steering, black leather interior. 1990 L98, white/red leather interior, auto,a/c
themailman said: I'm planning on replacing the Bilistien shocks on my 89 CONVERTIBLE(different p/n?).
Has anybody had good luck with KYB aftermarkets? I'm getting a REAL harsh/bumpy ride now and if those stock replacements do the same I really don't want them.
I've had to drop 10-15 psi in the tires to keep things from shaking loose!

just a quick question. are you over inflating the tires? the place where i get my tires suggest to follow the inflation rate that is on the sticker on the vehicle and not what is on the tire which can be a lot different. just seems that that is a lot of pressure to drop.

LIFETIME MEMBER #97
THE DYNAMIC DUO


Be the first to like this post
Sign In to Like this post

Re: shock replacements

Posted: 4/29/12 5:16pmMessage 4 of 6
S
Free Member
Send PM
Ormond Beach, FL - USA
Joined: 4/18/2011
Posts: 13
Vette(s): 1996 Corvette Collectors Edition Silver with black interior
  I do not want to sound like I'm bragging on my self but I am fairly well knowledgeable on suspensions and tire pressures and from the schools I've been to Eddie is correct with his information on the tire pressures. Normally the sticker on the door is the correct pressures to keep in the tires although one 'can' vary tire pressure 4# to 6# to get the best wear out of them. One wants all the tires to wear evenly across the tread surface.  If one changes more than that you can expect the opposite happening.
Be the first to like this post
Sign In to Like this post

Re: shock replacements

Posted: 4/29/12 5:26pmMessage 5 of 6
S
Free Member
Send PM
Ormond Beach, FL - USA
Joined: 4/18/2011
Posts: 13
Vette(s): 1996 Corvette Collectors Edition Silver with black interior
  All so, ''shaking'' or vibration is caused most of the time by a tire imbalance, not the tire pressures. Tire pressure may let you aware of the imbalance due to being harder with less give in the side wall. If tire balance is not out, which it only take 1/4 of an ounce. That 1/4 of an ounce turns into 5#'s of thrust at 62 mph. It doesn't take much to be out of balance. The other most commonly cause of tire imbalance is caused by a loose part or even a bent wheel.  
Be the first to like this post
Sign In to Like this post

Re: shock replacements

Posted: 4/30/12 6:36amMessage 6 of 6
Profile Pic
Free Member
Send PM
Bowling Green, OH - USA
Joined: 10/3/2009
Posts: 30
Vette(s): 1984 Light Bronze/Dark Bronze Z51 Coupe 2002 Magnetic red convertible
My '84 has the Z51(STIFF!) suspension.  When I got it the shocks were completely shot and it rode like a log wagon.  I put KYB's on it and the ride really improved.  It's still stiff, but now I don't lose teeth when going over tracks and potholes.
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C4 Electrical, Body and Interior


Sponsored Content