Passenger window switch

Over the past few months the passenger window switch has begun to fail when trying to raise the window. '94 convertible (It works to lower) The drivers side is fully functional for both raising and lowering the passenger window. Is the switch defective requiring replacement or can it be taken apart for cleaning ?

|UPDATED|9/26/2016 9:45:26 PM (AZT)|/UPDATED|

Put new.

Thanks,looks like I'm off to the parts people. Tougher job than I thought finding the switch. Any leads that I can use? Also, does the switch come out from the panel when I get the replacement without taking the door panel off? I appreciate your responses.

|UPDATED|11/3/2016 8:02:48 AM (AZT)|/UPDATED|

Probably the best solution is a new switch but you can also try to remove the switch and douse it with TV tuner cleaner to remove possible corrosion on the switch contacts.  This helped me when I didn't want to replace my '88 power seat switch when it didn't operate a couple of years ago.  Radio Shack or some other electronic parts store sells the tuner cleaner.

Part #: 25-379185-1

Corvette Passenger Window Switch, 1990-1993

 

The switch above Is from Ecklers.

replace it  if you can take that apart and put it back together I have a couple sets of mirrors for you to repair LOL  

What he said ^  Had this on my truck.  If the contacts are bad, you may disassemble and get them going but it's likely temporary only.   Get a new switch and be done with it.

After much searching, I was able to get a replacement window switch for my '94 . Whew! Does anyone know if the door panel needs to come off to replace the switch or if it can be replaced without removing the panel? Any thoughts are appreciated.

Switch should pry out without disassembling door.
Goto 3:54 https://youtu.be/uzz1Du3TgRw

Corveddie