Sponsored Content
t
My oil level sensor on a '94 LT1 is leaking around the plastic sensor, not the gasket. Is there a remedy and, if not are they still available??
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22737
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
If it's actually leaking between the plastic connector area and the threaded part, it needs to be replaced. You could try to clean it real well, and put some silicon or something around the edge, but it prolly won't solve the problem for long.
The sensor should still be available, either from GM, or aftermarket.
The sensor should still be available, either from GM, or aftermarket.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
t
Joel, thanks for the response. Yes , it is leaking between the plastic and the threaded portion.
Also thanks for the tip on how to access the forum topics for more than a 24 hr. period.
Don
Also thanks for the tip on how to access the forum topics for more than a 24 hr. period.
Don
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Part number should be 24507190
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
t
Thanks Toptech. This will come in handy for the kid behind the counter at the stealer.
Don
Don
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C4 Electrical, Body and Interior
Sponsored Content