instructiions or video for replacing trans shift panel light blub
Forum: C4 Electrical, Body and Interior
3 Messages
Page 1 of 1
Sponsored Content
c
I am seeking help to locate instructions on removing the center shift consule on a 94 C4 so I can replace the trans shift light. Just bought the car two months ago and I restoring it to show quality. Thanks
Rick
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Hey fellow vetter I have a93' automatic start console removal by removeing 5 Philps screws 2 are straight ahead , one is under ash tray and final 2 are hidden under felt in forward left and right corners of cd rack . Use a small straight flat screw driver to " wedge" out Shifter button and there is a small snap ring around shifter to keep leather boot in place . So 5 screws, 1 snap ring , and console piece should strait up. I also took the junk box lid off to get it out of my way. The shift light bulb is a turn and lock set-up when putting back together be careful to set plastic shift indicator ove the horizontal rod that is attached to shifter Hope all this wasn't to confusing good luck
1 person likes this post
Sign In to Like this post
Sign In to Like this post
Hi again. Please let me amend previous message, there ar only. 3 screws , 7 mm needed to remove the console , the front two are guide tabs to align the console Sorry if I misseled you the rest of my message is correct it's been a while since I had. Console apart
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C4 Electrical, Body and Interior
Sponsored Content