Sponsored Content
Sign Up To Join Us Now!
I first bought a spare front bumper cover at Carlisle with the thought of having it painted and swapping it with the original when the stone chips start to add up. I finally got it to the paint shop but when I started mounting it, I found the top and bottom stiffener brackets were missing. SOAB! So, start looking for some only to find they run $30 apiece. Not going to happen, especially since I've drawn blood on the exposed screws while trying to clean down there, blind. So, I took my originals off, measured it up, replicated in a CAD file and had what you see cut in 16 ga. stainless on a hydro cut machine, taped it for 5mm button heads. Fits like a glove, looks and works better. Note, the right and left sides are identical, just turned 90 deg.
.JPG)
.JPG)
After all the effort, I cut some extra's beyond what I needed for my two bumpers. If there was some interest, I'd consider selling some and for less than you can by OEM.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I'd be interested in a pair shipped to 17350. Email me a price and payment preference.
Thanks, Doug
rdchaplin@embarqmail.com
Thanks, Doug
rdchaplin@embarqmail.com
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I know this is an old threat. But if you still have a set I'd like to know the cost.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
...sorry, no interest so I dropped it.
|UPDATED|9/25/2014 4:50:57 PM (AZT)|/UPDATED|
|UPDATED|9/25/2014 4:50:57 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C4 Electrical, Body and Interior
Sponsored Content