Sponsored Content
I recently bought an 85 C4, ran great for the first week. Started cutting out while driving, and giving me a code 33 (MAF sensor). I replaced the MAF sensor, reset ECM but code 33 comes back. I've been trying to hook up my scanner but can't get it to receive a connection. I've cleaned the ALDL connector with brake cleaner but didn't help. Today I started getting a code 24 (speed sensor) and a code 33. Is there a way I could check if the ALDL terminal E is working ?
|UPDATED|1/9/2016 10:17:05 AM (AZT)|/UPDATED|
If it isn't, what is my next step?
|UPDATED|1/9/2016 10:17:05 AM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22714
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
I got your PM, and responded. 
Check the MAF burn-off relay first. If there is a problem with that relay, it could kill the serial data, as well as set the MAF code.
Check the MAF burn-off relay first. If there is a problem with that relay, it could kill the serial data, as well as set the MAF code.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thank you for your response.
I'm using A Dell lap top with TOAD software as a scanner, and yes I jumped terminals A & B to get the codes. The 85's has a burn off module under the ECM, rather than a relay. I believe a relay is built into the module. I suspected the burn off module before I ever tried the scanner, but a module is around $250 and I wanted to confirm before throwing money at the problem. I didn't know signal to terminal E came from that.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C4 Electrical, Body and Interior
Sponsored Content