More missing parts....help name this one?
Forum: C3 HVAC, Fuel, Emissions, and Exhaust
11 Messages
Page 1 of 2
Sponsored Content
H
Free Member
Send PMCarson City, NV - USA
Joined: 12/4/2013
Posts: 239
Vette(s): Numbers matching 1972 350 4 speed, silver pewter body with blue interior
Ok, now I've found that I'm missing a piece of sheet metal on my 72 no AC, 4 spd small block. If you can help me properly name it maybe I can locate one....so here's the descrip: It mounts by 2 small screws left and right to the upper rad core support. It fills an opening between the top of the core support and the top of the rad. It will run between a portion of the fan shroud, at the very top. It will be maybe 4" tall and full width of the core support...like 32" or so. It would assist in forcing air through the rad vs. going over the top of the rad.
Thanks,
Dave
Thanks,
Dave
My Christmas present to ME! Bought Sat 11-30-2013. 72, 350 4 spd, Silver with blue interior...Can't you just hear Pablo Cruz playing in the background?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I'm looking in a Corvette Illustration Catalog from Sept 1977. It pictures said bracket but no part number or discription is given. There are two holes by the center to bolt the rad. support thru it to the rad. support bracket. It does not appear to be much extension towards the radiator ( maybe 1") to funnel wind thru.
Only 34 years together
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
C
Lifetime Member
Send PMLa Quinta, CA - USA
Joined: 3/19/2008
Posts: 53
Vette(s): 1968 convertible, small block, auto, pw, pb, ps, air, 3rd owner CA black plate
Looking at a '68 AIM, I would call that the Upper Radiator Baffle. '68 part number was 3930127. hope this helps.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
H
Free Member
Send PMCarson City, NV - USA
Joined: 12/4/2013
Posts: 239
Vette(s): Numbers matching 1972 350 4 speed, silver pewter body with blue interior
Cool. Good place to start. Thanks! Wish I had a vette wrecking yard around here....no such luck. I suppose if I can't find one I can make it.
My Christmas present to ME! Bought Sat 11-30-2013. 72, 350 4 spd, Silver with blue interior...Can't you just hear Pablo Cruz playing in the background?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
C
Lifetime Member
Send PMLa Quinta, CA - USA
Joined: 3/19/2008
Posts: 53
Vette(s): 1968 convertible, small block, auto, pw, pb, ps, air, 3rd owner CA black plate
Hey, Dave saw this one on ebay when looking for some other stuff..
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22714
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
ebay said:
This part is not compatible with 1972 Chevrolet Corvette.
This part is not compatible with 1972 Chevrolet Corvette.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
H
Free Member
Send PMCarson City, NV - USA
Joined: 12/4/2013
Posts: 239
Vette(s): Numbers matching 1972 350 4 speed, silver pewter body with blue interior
Yep, not compatible but thanks for the effort. I'll get a good look at where /how it mounts and maybe make one up. We have sheet metal shears and brakes at the shop. I'd rather spend $75 than 3 hours making patterns and piece mealing something together though...ya know?
My Christmas present to ME! Bought Sat 11-30-2013. 72, 350 4 spd, Silver with blue interior...Can't you just hear Pablo Cruz playing in the background?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMLemon Grove, CA - USA
Joined: 10/17/2007
Posts: 2041
Vette(s): 1982 C3 Collectors Edition 44000 miles, sat in the sun most of its life, My wife purchased it for me for Father's Day in 2007 from her girlfriend that had it for 19 years. It is on the road again. I'm retired but it is now my daily driver.
I'm going over to my local C3 corvette junk yard I will take your description with me and see if he knows what you are talking about and see if I can get a picture and price for you. If you have more than a few of those types of parts you may want to take a long weekend and drive down to San Diego.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMLemon Grove, CA - USA
Joined: 10/17/2007
Posts: 2041
Vette(s): 1982 C3 Collectors Edition 44000 miles, sat in the sun most of its life, My wife purchased it for me for Father's Day in 2007 from her girlfriend that had it for 19 years. It is on the road again. I'm retired but it is now my daily driver.
Ok I just got back from my C3 junkyard. Good news Dave, he has what you want. Steve does not know what you call it but when he read what you wrote he knew exactly what it was.
What is it? Steve said he sure that for all 72-74 non-AC cars use the same part. They all had smaller radiators than AC cars and this item was used to make up the difference in the size so that air would flow through the radiator.
Just as you said.
If you are interested the cost would be $40 plus shipping and he will take a picture of it so you can confirm it is what you want before you by it. He just does not want to dig it out unless you are still interested in it for the price he wants.
If you are interested PM me and I will give you his contact info. (Cell phone and email)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 HVAC, Fuel, Emissions, and Exhaust
Sponsored Content