Sponsored Content
Fan works when set to AC but not on Heat/Defrost.
Anyone got any thoughts on this one? I'm guessing the fan motor myself but I'm not sure how to trouble shoot it short of just buying a new one and putting it in.
Lifetime Member #73
The Money Pit.... and my niece 
(click to see a slightly larger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
If it runs in AC then the motor works. The fan switch contols the motor it should not matter if it's in AC or heat. Maybe the control lever is shorting out something under the console? Just a guess.
Dave
Lifetime Member #116
Dave's '82 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
g
I agree with Dave, it sounds like the lever. I changed one out - brand new from Eckler's and it did not work. Got another one from them and it works now. They have copper connector points on the back side and the lever can come loose/wobble at the pivot.
At least that is what happened to me. I am still not impressed with the part they sent in and that is the only negative thing I could say about them, but I might try another supplier if that is what you find is the problem. That should be the problem. Do you have different speeds at the A/C setting?
Rick
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Yup...if the fan blows with A/C, then it is working. The problem is most likely to be the control switch/lever that changes the "modes"(A/C-heat-defog)
Like Rick I am curious to know if the fan has all speeds on the A/C setting...
Like Rick I am curious to know if the fan has all speeds on the A/C setting...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I'll try it out when I get home this weekend... I don't remember.
Lifetime Member #73
The Money Pit.... and my niece
(click to see a slightly larger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Moses Lake, WA - USA
Joined: 4/16/2005
Posts: 2134
Vette(s): 1976 L48 4-spd, Mahogany Metalic exterior, Buckskin interior 350ci/350hp, 3rd owner, fiberglass spring, 255/50-16's Torq-Thrust II
If I remember right I have the same problem last year. I had to move between the heater and A/C selection to get it to work.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
gurtz, I had the same problem with my ac/heater panel, but I had to replace six control panels before I got one that works, all from Eckler's. Eckler's did return to me $400.00 bucks for labor cost. It was a complete pain.
JimG, man it sounds like a wiring problem to me, I hope I'm wrong, good luck man, Gene
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 HVAC, Fuel, Emissions, and Exhaust
Sponsored Content