Sponsored Content
I'm looking for some advice from you gearheads out there. i had the timing adjusted on my 68 Tri-Power because it was pinging. Well, that problem was fixed but now I'm getting a slight backfire on a cold start. Hot starts are no problem. Any ideas what could be the cause?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
r
What have you got the baseline timing set at?
Scott
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Also check the choke adjustmets.
On the "Tail of the Dragon"
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
okay, after two weeks, i finally have some answers. The timing is set at the officially correct setting of 4 degrees. A good mechanic I know has recommended the choke settings be checked, just like Kyster here. So we're going to do that.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 HVAC, Fuel, Emissions, and Exhaust
Sponsored Content