Home page

82CE throttle body kit

Forum: C3 HVAC, Fuel, Emissions, and Exhaust

2 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

82CE throttle body kit

Posted: 6/22/20 3:24amMessage 1 of 2
D
Free Member
Send PM
Baton Rouge, LA - USA
Joined: 6/2/2020
Posts: 1
Vette(s): 1982 Collector Edition

I am going to be putting a kit and remaned injectors in my throttle bodies in a week or so.

I really want to pull both bodies from the plate and replace those gaskets. My fear is when I separate the bodies from the plate, they will lose synchronization. I don’t want to have to start drilling and filing welds. The car is running okay now, it just stumbles a little. 

If I pull the entire top plate, put the plate with bodies on my workbench, then, without disturbing the connecting linkage or fuel line, I slightly lift each body and replace the gasket, will the dowels inserted in the plate kept the synchronization?

Or, once the bolts have been loosened, the bodies shift enough to throw it off?

Advice from someone who has done this before, please.

Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

Re: 82CE throttle body kit

Posted: 6/24/20 7:29amMessage 2 of 2
Profile Pic
Lifetime Member
Moderator
Send PM
Burke, VT - USA
Joined: 1/23/2002
Posts: 7601
Vette(s):
SOLD - "The Toy" - '70 Convertible
SOLD - "The Beast" - '90 ZR-1 (#682)
SOLD - "Betty" - '28 Ford Model A Tudor
SOLD - "BLKBRRD" - '78 Pontiac Trans Am
"BLUBYU" - '04 Coupe

Years ago I helped a PK82CE replace the gaskets on his newly purchased car after we had a "fun" drive from California to Minnesota/Wisconsin.  Thankfully a set of GM shop manuals came with the purchase of the car.  Having never done this before we followed the steps in the manual to the letter and didn't have any issues taking things apart or putting it all back together.  The car ran better after replacing the gaskets but there was still something not quite right.  The real problem wasn't discovered until several months later and after that was fixed to the best of my knowledge the car has been running perfectly (remember to use fuel grade rubber hose when connecting the fuel pump to the fuel line!).

Jim Olson 

"The Toys"...!!!  Save the Wave!

Where I've been in a Corvette...!!!

Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 HVAC, Fuel, Emissions, and Exhaust


Sponsored Content