Sponsored Content
7
You guys are making me feel lucky. I do most of my own work but do occassionally use a very Corvette friendly mechanic who is reasonable and is always timely.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Vette Registry Founder
Moderator
Send PMVette Registry Founder
Moderator
Eagleville, PA - USA
Joined: 11/1/2001
Posts: 27331
Vette(s): Used to own a 1979 Corvette now owned by JB79
So, I talked to the guy. They're backing off some of the cost. It is now around $600 and change... they're still trying to get the idle right, and said that at this point, the work they are doing to finish it up is free.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMCOPPERAS COVE, TX - USA
Joined: 7/6/2002
Posts: 475
Vette(s): 1972 corvette stingray convertible
2007 coupe
You should have brought your car to HS, seems like they could have done all that in the parking lot along with the other repairs. Just a thought?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Former Member
Send PMManteca, CA - USA
Joined: 11/20/2005
Posts: 3623
Vette(s): 1978,two tone,Metalic Rootbeer & gold
1975 L48 4 speed
and if you'd have left it at home in the garage, we'd at least have blown the carbon out of it for ya 
.
.Jimmy B.
Just can't wait to get on the road again. 
Click to see larger views!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
K
I just recently had everything on my AC replaced. Hoses Compressor, Dryer, belts, Everything new from GM and I took a new fuel pump, and temp guage they did everything for 1100.00. Changed torc converter before having restoration done then put alot bigger motor with much more cam and now need the converter that I had taken out and replaced put back. The stall is not right for the cam I have now. Estimated 200 for new converter and 400 for labor. Have a good mechanic and also is a friend for yrs. He also drag races a 63 split window pro mod.
Sounds as if your getting really gouged on labor prices. Some have a manuel that gives the time needed to repair something. Usually it does not take even 2/3 the time but still charge by the book.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
There is always Saturday afternoon in Cuyahoga Falls. No labor. Heck of a commute. Not in the cold or rain. But where can you get a deal like that?
kstyer 2008-05-11 18:44:43
Adam, is this idle adjustment after I did the carb work. Wish I could adjust it, but too hard to get the running car here to do so. Wish you could make it, or I could get there.
How is the idle now?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
ALWAYS make sure you get the cost before the work is started.
And if they find something else while they are in there, they better call you first.
BTW, what is the labor rate?
Save the Wave!
Support the National Corvette Museum
Support the National Corvette Museum
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I don't know about other states, but in Ohio the law states any repair over $25. requires an estimate. The customer can choose written or oral. Either way, the repair order should indicate the choice.
The total must be within 10% of the original or have additional approval from the customer.
If the additional amount exceeds 10% over the estimate without further approval, the customer does not have to pay anything over the est plus 10%.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
o
Well here's my money pit short story. I spent 400.00 to have my front end taken off the whole thing was crap. Spent 6500.00 to have my engine rebuild and 1000.00 to have it put back in. 500.00 to change it from automatic to manual thats just labor payed 1000.00 for a 69 Muncie with bell housing. Payed 650.00 for engine harness and dash harness. All this without a front end thats for next year. Yes I did say my car was a mess. But someday she will look nice.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
E
Im glad to see that i am not the only one feeling the pocket pain.
cost of vette, 6k, new distributor and carb, 400, new plug and wires, 200, new wiring harness with bells and whistles, 650
LOOK ON MY LOVELY WIFES FACE--- PRICELESS
HER ATTITUDE, DONT ASK...
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 General Discussion
Sponsored Content