Sponsored Content
If a C3 did not come from the factory with PS or PB, how big a job is it to install PS or PB? I'm thinking it's not a weekend job, eh? But then how long and how much would it cost?
Steve
Steve
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
g
Free Member
Send PMDOWNINGTOWN, PA - USA
Joined: 11/24/2001
Posts: 962
Vette(s): 1969 Monza Red Black Conv / Black Vinal hardtop
454/480 Tremec 5 Speed 308 Posi.Black Leather Interior, PS, PW, Air cond., tilt/tele,AM/FM Cass.-5 Pack CD, Hurst Shifter, side pipes
2004 Yellow convertible with black top and black interior
Never tried it but you should be able to go to a junk yard and get everything you need (year specific). I bet you could contact Contemporary Corvette here in Penna. and get hooked up. Or you could spend a small fortune and buy everything from one of the major suppliers.
I guess if I were doing it, I would buy the major hardware like the rotors from a junkyard and get new calipers with stainless sleeves and new PS pump from a supplier like Ecklers or MID America. Or get it all from the junkyard and rebuild the calipers and PS pump. Buy new brake lines for the calipers.
Good Luck.
I guess if I were doing it, I would buy the major hardware like the rotors from a junkyard and get new calipers with stainless sleeves and new PS pump from a supplier like Ecklers or MID America. Or get it all from the junkyard and rebuild the calipers and PS pump. Buy new brake lines for the calipers.
Good Luck.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 General Discussion
Sponsored Content