Sponsored Content
Does anyone know of a place that sells orange engine paint that is not
in an aerosol can. I would like to touchup my engine by either hand
painting or use an air brush. Tried the local auto paint store and they
only stock the rattle cans.
Silver69 38427.9393518519
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
E
Why not spray it in the lid of the spray can and use a brush to touch up what you need touching up.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
R
Or tip the can upside down and spray all the propellent out of the can and when all the pressure is out of it,carefully drill or punch a hole in it and drain all the paint out,just make SURE you have all the pressure out,you'll have all the paint you need
Make sure you shake the can good B4 you start the processRon 78 38428.3021296296
Make sure you shake the can good B4 you start the processC3VR Lifetime Member #93
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
You can also use a piece of paper, cut a small hole the size of the touch up spot, and spray through the hole to do just a small spot.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
w
Gold Member
Send PMClifton, NJ - USA
Joined: 10/3/2003
Posts: 142
Vette(s): 1972 Coupe
Ontario Orange
Black leather interior
LS-5; Turbo 400
POR-15 makes a Chevy Moly Orange engine paint, in a pint or quart can, that has about the highest % of solids I have ever seen.
Most of the Auto parts stores / speed shops in NJ carry the POR-15 line, although I had to order the can I bought. POR-15 advertises direct sales in Hemmings, also.
NJ BB Ken
1972 T Top 454; "Boomer" Latest "upgrades": 1 1/8" front Stabilizer bar. Rebuilt SS calipers with O-ring pistons. Under car Chambered exhaust. Fiberglass rear spring (360lbs/in). Bilstein Rear Shocks. 3/4" Rear Stabilizer Bar. Tow hitch. Performer manifold with 600 cfm Holley. Comp Cam 262 .499 lift. L-88 Hood in process
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 General Discussion
Sponsored Content