Sponsored Content
So, the manual says either a TH350 or TH400. How do I tell? Time to change the pan gasket and filter, and I just don't trust the Jiffy Lube places to do this. I have a '77 L48 with a 3.08 rear.
Thanks,
Thanks,
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I'm couris too I have a 75 stingray 350 auto trans........ ?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
c
The TH350 is square except for one corner is on a 45 deg. and the TH400 is not square. Here are two links that show the pans.
http://www.tpiperformance.com/thdeepalpan.html
http://www.tpiperformance.com/th350deeppan.html
Good Luck
Jim

http://www.tpiperformance.com/thdeepalpan.html
http://www.tpiperformance.com/th350deeppan.html
Good Luck
Jim

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks for the links, Jim!
Thanks for the help, too!
Thanks for the help, too!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Goog Links looks like I have the 400, might even buy the pan ....................TKS. 

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content