Sponsored Content
g
Former Member
Send PMbrantford, canada
Joined: 12/28/2002
Posts: 39
Vette(s): 75 coupe being restored. engine rebuilt & complete interior resto with interior color change. more when i get it together. i am not going original as over my head, too expensive and i'd rather drive than tinker. thats to frustrating for me.
I have a 75 with a 350 and the brake pedal goes to the floor and the brakes still are working. The previous owner used anything under the sun to keep the car running at minimal cost and the vacuum lines are all different sizes with some very strange, deffinately not stock connections! Where can I get a proper schematic with all the right specs. Thanks for any help you can give!! Gmacp 

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I'd recommend picking up an assembly manual... lots of good info for working on the car in general.
aka
aka
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
It is nice to see that the diagram's that I send you is ok good !
if you need more just ask.
Normand

if you need more just ask.
Normand

Be the first to like this post
Sign In to Like this post
Sign In to Like this post
r
Hi Normand,
I could really use the same thing for my 69 convertible. I have the under dash diagram but not the underhood diagram. In the coming weeks I will be testing the entire system and replacing hoses. I do have A/C if it makes a difference.
Thank you!

I could really use the same thing for my 69 convertible. I have the under dash diagram but not the underhood diagram. In the coming weeks I will be testing the entire system and replacing hoses. I do have A/C if it makes a difference.
Thank you!

'69 350/350 conv.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content