Home page

universal joints

Forum: C3 Engines, Driveline and Handling

23 Messages
Page 1 of 3
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

universal joints

Posted: 8/21/06 8:57pmMessage 1 of 23
j
Lifetime Member
Send PM
Huntsville, AL - USA
Joined: 11/15/2003
Posts: 858
Vette(s): 1971 convertible,375 HP 350ci,Muncie 4-speed,Edelbrock aluminum heads and RPM air-gap manifold,HEI distrubiter - old school mechanical tach drive. LOUD side exhaust!

Ok, yet another question for the gurus. While taking the transmission out last month, it hit the front universal joint on the drive shaft. One of the caps came off. Here's a pic:

Can I buy a new universal joint, and take the bearings and cap from it and put on this one? If not, can the unioversal joint be replaced with the driveshaft in place? I gave a good look under the car this evening and I might be able to get the rear caps off, but I don't know if I'll ever get them back on - it's really tight up there .

This falls directly under the category of "I messed it up and now have to fix my mistake". Thanks in advance for the adivce. Feel free to even sit back and say to yourself (or to me) "that poor bas$%#d, I'm glad I'm not in his place!!"

Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

universal joints

Posted: 8/21/06 9:34pmMessage 2 of 23
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
"you poor bas$%#d, I'm glad I'm not in your place!!"

The chances of a different u-joint cap actually fitting on the old joint are slim to none. Did the cap completely disappear?

If you are gonna get a new joint, why not go ahead and take the shaft off, and do both of them? You cannot replace the joints in the car, unless you have a u-joint press. I'm guessing that's the one thing you don't have, right?
You can get the rear bolts/straps off ok, it just requires a little finess(and little hands help).

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 4:17pmMessage 3 of 23
C
Former Member
Send PM
Alice Springs, Australia
Joined: 5/6/2004
Posts: 535
Vette(s): 71 Coupe Black on Black
If the old cap and needle bearings look good and the uni itself has now wear marks, I'd be pulling the other cap off and cleaning/regreasing and putting them back in.  You can replace a uni joint while in the car but it's a PITA and you need to make some special tools to do it.
Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 4:30pmMessage 4 of 23
R
Lifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3825
Vette(s): ......
Pull the drive shaft out,and replace the U-Joints,there probably due anyway,dont forget to put a drain pan under the tail shaft when you pull the shaft out,as long as you're under there,drop the tranny pan and change the tranny filter,then refill with fresh tranny fluid,kill 2 birds with one stone,or 3 birds ,check the rear tranny mount,and replace it if its mushy,that should keep you busy for a couple of hours

C3VR Lifetime Member #93

Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 4:58pmMessage 5 of 23
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
uh....gee, Ron, you're really up on thangs, ain'tcha?
The cars has no engine or trans in it!!! Plus...it's a 4speed.

(See whut happens when ya don't(or cain't) come around much?!? )

But, if it did, that would be good advice!
jes messin wid ya!

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 7:28pmMessage 6 of 23
R
Lifetime Member
Moderator
Send PM
BINGHAMTON, NY - USA
Joined: 7/19/2003
Posts: 3825
Vette(s): ......
Well udder dan dat ,he could do it ,Right Ron 7838951.8119212963

C3VR Lifetime Member #93

Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 8:49pmMessage 7 of 23
j
Lifetime Member
Send PM
Huntsville, AL - USA
Joined: 11/15/2003
Posts: 858
Vette(s): 1971 convertible,375 HP 350ci,Muncie 4-speed,Edelbrock aluminum heads and RPM air-gap manifold,HEI distrubiter - old school mechanical tach drive. LOUD side exhaust!
Laughing - too - hard - to - type
Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/22/06 9:21pmMessage 8 of 23
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
[QUOTE=jgoglick] Laughing - too - hard - to - type [/QUOTE]

Thar be yer answer, Ron!

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/23/06 7:39pmMessage 9 of 23
Profile Pic
Lifetime Member
Moderator
Send PM
CUYAHOGA FALLS, OH - USA
Joined: 12/2/2003
Posts: 6424
Vette(s): 1975 C3 Red, T-Tops, Black Interior. All I need is time and money! Getting there!

Just have to add this.

 

What is a universal Joint????

It's a place where they let anybody hang out.

kstyer38952.8196990741
Be the first to like this post
Sign In to Like this post

universal joints

Posted: 8/23/06 8:09pmMessage 10 of 23
j
Lifetime Member
Send PM
Huntsville, AL - USA
Joined: 11/15/2003
Posts: 858
Vette(s): 1971 convertible,375 HP 350ci,Muncie 4-speed,Edelbrock aluminum heads and RPM air-gap manifold,HEI distrubiter - old school mechanical tach drive. LOUD side exhaust!
[QUOTE=kstyer]

What is a universal Joint????

It's a place where they let anybody hang out.

[/QUOTE

:::silence - then a lone cricket chimes in:::     

 

Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Engines, Driveline and Handling


Sponsored Content