Sponsored Content
R
Okee Dokee ,I finally crawled back under her wid my long extension and a wobble socket and got that darn bolt off got the modulater valve off,lost some fluid there.figure as long as I'm under there just for laughs I'll change the filter,how many qts.of fluid to refill the tranny for a filter change,TH350
C3VR Lifetime Member #93
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Prolly 4. The trans will take aboot 10-11 quarts when completely empty, and fluid changes will normally require around 4 qts...just depends on if it were low to start with. 
Dextron II or III is fine...
Dextron II or III is fine...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Don't over torque the pan bolts, it will squish the gasket out, run it for a bit and re torque...I believe that it is 8 ftp. Also take a straight edge to the pan gasket area and make sure there is no dips.
acplus 2008-10-20 15:46:02
John
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content