Sponsored Content
For the forum...and to answer a buddies question (and satisfy my curiosity 
)...
)...
Are the timing chain gears, either upper or lower, still metal in 80's, 81's and 82's????
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
They(the upper/cam gears) have always been "metal", either steel, or aluminuminum. The aluminuminum gears have a nylon coating on the teeth sections that will eventually break, and fall off, causing all kinds of problems, including stopping up the oil pick-up screen. These gears are sometimes referred to as "nylon" gears, but they are not made of nylon...just the teeth are nylon coated. They did this supposedly to make the gears quieter.
Best to always replace with a steel gear, and preferably a full roller gear set, as a roller set will last much longer, and keep the timing more accurate over the life of the gears.
btw...I'm not sure when they first started using the nylon coated gears, but most assuredly the '80s cars had them. My '74 had steel a gear from the factory. I replaced it with a roller in '98.
Adams' Apple 2010-07-12 09:50:53
Best to always replace with a steel gear, and preferably a full roller gear set, as a roller set will last much longer, and keep the timing more accurate over the life of the gears.
btw...I'm not sure when they first started using the nylon coated gears, but most assuredly the '80s cars had them. My '74 had steel a gear from the factory. I replaced it with a roller in '98.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content