The first annual,

Ok so not really a contest but does anyone know what the hell this is. Im guessing it used to be attached to something, because everything else is, but I have no idea what.
Go to this web site (sorry dont know how to link yet)

http://img2.exs.cx/img2/7441/IMG_1765.jpg
(heres a smaller scan)
http://img28.exs.cx/img28/455/thingy.jpg

Specifically Im looking at the little capacitor looking thing with the (now) unattached wire on it. Any ideas?
Also its a pretty big scan
Thanx
Glenn

It is the Tachometer filter. It is mounted on the block and is an inline feed/filter from the distributor to the tachometer. If your tach is functioning properly without jumping around then don't worry about hooking the filter back up. Hope this helps

|UPDATED|7/3/2004 8:04:41 PM (AZT)|/UPDATED|

Clickable links from above:

http://img2.exs.cx/img2/7441/IMG_1765.jpg - quite large!

(heres a smaller scan)
http://img28.exs.cx/img28/455/thingy.jpg

teh filters go bad all the time they were really expensive for my car the connectors are the same w or w/o the filter so by-pass it.

Sometimes the tach will work fine without the filter. Other times the tach will be erratic, or inop without the filter. In a few cases long time use without a filter can cause the tach to start acting up, and the filter reinstalled cures it. It's a bit of a crap shoot. It should be there.