Home page

shakin' it up too much!

Forum: C3 Engines, Driveline and Handling

8 Messages
Page 1 of 1
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

shakin' it up too much!

Posted: 9/22/10 4:36amMessage 1 of 8
Profile Pic
Lifetime Member
Send PM
Jenison, MI - USA
Joined: 10/2/2004
Posts: 198
Vette(s): 2010 Corvette Engine 400 horse 435 FPT,ghost flamed,chrome block,rack&pinion,hooker headers/pipes,lowered,Tremec5spd, 3.73,'67 hood,'72 sld t-tops, cstm logo seats, dualquad 500cfm 383/435hp stroker.VPB susp frt and rear, 1980 CUSTOM CARGO TRAILER
Hekllo friends - I have a question that I am sure one of you can answer - at speeds above 70 (which I know I shoiuldn't be driving) the front end starts to shake - not a lot but enough to be of concern.  Any ideas what could be causing that?  I recently had the front end aligned and wheels balanced but the problem continues.  We put a 2010 crate 383 in it last winter and I have the speed direct A-arm replacements and new stabilizer bars.  I am at a loss but would sure lioke some ideas.  Thanks

Ken - C3VR Lifetime Member #79

Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

shakin' it up too much!

Posted: 9/22/10 6:08amMessage 2 of 8
Profile Pic
Free Member
Send PM
Oak Creek, WI - USA
Joined: 5/21/2008
Posts: 2041
Vette(s): 1981 Great White Shark. Red Interior, 350/190 hp. PS, PB (SS), A/C CC, T-Tops. Served three years in Active Duty Army, then Retired Air Force after 34 years! Badger State Vettes Car Club. 175,000 Original miles!! Now own a 1998 C-5!
Can you feel the shaking in the steering whel?  Can you feel it in the seatr??  What speed does it start and stop (if stop at all!)
Dan
Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/22/10 7:50amMessage 3 of 8
Profile Pic
Free Member
Send PM
Newport, MI - USA
Joined: 6/9/2005
Posts: 942
Vette(s): 1980 L-48 still in the middle of a frame-off.
You could also have a tire problem like a bent rim or a broken belt inside the tire. Are your tires very old?? + 6 years??  I had a tire with a damaged belt that took me a while to figure out what was wrong. 
 
Good Luck  DB

Corvettes and women are the same...You want to make love to them but they keep breaking down.
Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/22/10 8:11amMessage 4 of 8
Profile Pic
Free Member
Send PM
York, PA - USA
Joined: 5/18/2010
Posts: 1518
Vette(s): 1969 daytona conv. all original 350 350 380 4 sp w/air..and hard top
I have some input..depends on the wheels and tires you have..if the tires bulge out because the wheel width might be a little small,the wheel balancer will not compensate for the extra tire..go back to where you had them balanced and tell them to set the machine to the Fine setting..this will take out the little balance issue the machine set at normal will not do..also you can road force balance the tire with a Hunter machine..they have a search on their website to find shops that have it..there is an extreme setting on that machine that match balances the tire to the rim..not many people know how to do this on that machine but I use it on the front of mine and no shakes up 120 + so far..also check your lug nuts and make sure they are not loose! Just kidding ..wheel bearings being a little loose can make some weird shakes also..when they are bad though and I don't think yours are..being you just put new suspension up front..
Rich

My first parade at Carlisle 2010
Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/22/10 9:44amMessage 5 of 8
W
Free Member
Send PM
Henderson, NV - USA
Joined: 11/16/2007
Posts: 48
Vette(s): 1982 Coupe,ZZ383/425HP,Tremec 5 Speed, 354 Dana,VBP Pro Comp dual Mount Suspension, Steeroids Rack & Pinion. Affiliation: Yakima Valley Vettes
Don"t forget to check your wheel bearings! They will dry out over time and the race will deform. Best of luck.
Mark
Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/22/10 10:19amMessage 6 of 8
Profile Pic
Lifetime Member
Moderator
Send PM
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas
How 'bout yer shocks? How old are they?
Combine older shocks with a slightly out-o-balance tire/rim, and you'll get a pretty good bounce at that speed.
Is the steering wheel shaking left/right, or do you just feel a bad shake/vibration? If the steering is jerking back/forth, you got a bad rim/tire, and possibly a tie-rod end....

Joel Adams
C3VR Lifetime Member #56    

My Link


(click for Texas-sized view!)
             NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/22/10 8:47pmMessage 7 of 8
Profile Pic
Former Member
Send PM
Tucson, AZ - USA
Joined: 7/11/2010
Posts: 415
Vette(s): 1982 Black/Tan Leather Build Code C09E Bronze TTop CrossFire Fuel Injection L83 85 Fuel Pump Auto Axle 2.72 Firestone Firehawk Indy500
I had a vibration around 70. It smoothed out around 80.  It was not right.  When I put new tires on my 82 it was smooth past 100. Maybe swap the fronts for the rears and see what happens. I'm in Arizona.  If you drive at 55-65 you will never leave the state.

              Tongue

Nobody ever waves when I'm driving the Explorer.
K Woody
Be the first to like this post
Sign In to Like this post

shakin' it up too much!

Posted: 9/23/10 5:44amMessage 8 of 8
Profile Pic
Lifetime Member
Send PM
Dorr, MI - USA
Joined: 8/21/2002
Posts: 2581
Vette(s): 71 Colonnade Hardtop Coupe Torch Red with black interior originally L48 built to push around 360hp
Hey Ken. I'm sure you tried rotating the tires front to back see if it made a difference, as per Kwoody?
BTW, missed ya in Holland????Cry
my7T12010-09-23 05:47:45
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Engines, Driveline and Handling


Sponsored Content