Sponsored Content
I found it in the 1970--69 service manual while I was reading the whole thing for no apparent reason..I took a picture of it because I don't type all that well..Hope this helps M&S.
Rich


My first parade at Carlisle 2010
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Mark i found it
ebo
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
m
Lifetime Member
Send PMEquinunk, PA - USA
Joined: 10/31/2007
Posts: 2573
Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.
YES, I found it as well. THANKS to Rich and Al. I will try it soon.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
m
Lifetime Member
Send PMEquinunk, PA - USA
Joined: 10/31/2007
Posts: 2573
Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.
HOORAY, Piece of cake. Worked well. Minor adjustment needed. Must have gotten out of sync when we put transmission back in. THANKS Mark
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
While on the subject of lock -out adjustment....I was working on the interior wiring on my 1972 4 speed and found a wire where the insulation was melted end to end! The previous owner thought wrapping it end to end in electrical tape was an adequate solution!!! According to wiring diagrams and scrounging around in a 73 that was being used to display an Auto Twirler at Carlisle, the best I could determine this pink wire from the 4 way flasher element pairs up with a lime green wire into an "L" shaped connector which is gone in my car.. The matching half of that connector is also missing (no surprise) on my car but I believe that it connects through the firewall to a back up light switch mounted on the transmission. The entire back up light switch and harness is missing from my car as well so I have no way to verify this. Can anyone verify this. Its hard to determine even looking at the factory assembly manual. Sorry for the long post! Thanks!
Mario
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Neither of mine work, so I'll have to check into this. Was it really that easy, Mark? Stuff just aint suppose to be easy on these cars.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content