Replaced rear trailing arms project

Already a Member?

Welcome back! Access your account.

Not yet a Member?

Join our community! Registration is free.

Join Free

Forum List New Topic Reply Search Hide Signatures

Posted: 4/25/26 10:35amMessage 1 of 5

Reply Quote

Redwingvette

Lifetime Member

Send PM

Waterford, MI - USA

Joined: 9/13/2002

Posts: 1797

Vette(s): 1973 Red coupe

Finally finished up this early spring project. After replacing the front control arms last summer I decided to work on the rear. It’s been over 30 years since I had the rear serviced at a local shop.

This time I did it myself. I had great results with Van Steel on the front so I used them for the rear.(made in the USA). I purchased all new trailing arm assemblies and sent my used ones back to them as a core.

I purchased adjustable strut rods which made it easy to set the camber.

I spent a lot of time setting the shims to get the proper toe settings.

The I installed new KYB shocks. I bought the strut rods and shocks from Eckler’S.

I used the rotors I purchased a few years ago so I did ordered the trailing arms without rotors. They came with the new parking brake assembly.

Now I’m back on the road and loving it.

|UPDATED|4/25/2026 10:35:34 AM (AZT)|/UPDATED|

Brian - NCM Lifetime Member

73 coupe L48, Flat-top pistons, Performer RPM Heads, Crane Cam and roller rockers, Holley 650 vac sec. Performer intake,
3.55 gear BTO 200-4R trans,
Leather seats, Seatbelt Plus 3point seatbelts, Pioneer CD player
Magnaflow Exhuast System

Dewitt radiator and dual electric fans

Borgeson Steering box

2 people like this post
Sign In to Like this post

SPONSOR AD:: (Our Sponsors help support Vette Registry)

Re: Replaced rear trailing arms project

Posted: 4/25/26 2:18pmMessage 2 of 5

Reply Quote

Norsky

Lifetime Member
Moderator

Send PM

Burke, VT - USA

Joined: 1/23/2002

Posts: 7793

Vette(s):
SOLD - "The Toy" - '70 Convertible
SOLD - "The Beast" - '90 ZR-1 (#682)
SOLD - "Betty" - '28 Ford Model A Tudor
SOLD - "BLKBRRD" - '78 Pontiac Trans Am
"BLUBYU" - '04 Coupe

MOST EXCELLENT...!!! That's a big project and glad you're back on the road!

Jim Olson

"The Toys"...!!! Save the Wave!

Where I've been in a Corvette...!!!

1 person likes this post
Sign In to Like this post

Re: Replaced rear trailing arms project

Posted: 4/25/26 8:06pmMessage 3 of 5

Reply Quote

Adams' Apple

Lifetime Member
Moderator

Send PM

Duncanville, TX - USA

Joined: 11/8/2003

Posts: 22751

Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

Thassa LOT of werk...and cash! Looks nice, tho, and prolly a lot safer on the road. NIce job, Brian!

Joel Adams
C3VR Lifetime Member #56
My Link

(click for Texas-sized view!) NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

1 person likes this post
Sign In to Like this post

Re: Replaced rear trailing arms project

Posted: 4/26/26 3:32amMessage 4 of 5

Reply Quote

Kentvetteuk

Free Member

Send PM

Loir en Vallee SARTHE, France

Joined: 8/21/2002

Posts: 174

Vette(s): 1978 L48 Auto. Red with Oyster Leather interior. Owned since 1990.

That's a "fun" little project isn't it?!😄

When I did min e I went with new arms, but transferred all the existing bearing/hub/brake stuff, although I did need one new spindle. Doing so I did wish that I had gone with complete arms!😄 But overall the job went better than I had hoped. The hardest part was calculating what shims I needed to achieve the correct toe angle.

And, I was amazed at the difference it made to the car, clearly the old bushes were well past their best!

I'd like to do the front end, but that really does seem like a huge project!😱

Stephen J Irons
Corvette Club France

CCCUK Lifetime Member
Corvettes of Southern California
NCM Family Member
Red Corvettes Have More Fun!

1 person likes this post
Sign In to Like this post

Re: Replaced rear trailing arms project

Posted: 4/26/26 4:01pmMessage 5 of 5

Reply Quote

Redwingvette

Lifetime Member

Send PM

Waterford, MI - USA

Joined: 9/13/2002

Posts: 1797

Vette(s): 1973 Red coupe

I can honestly say the front was well worth the effort. I did buy a spring compressor which made the job much easier. The tubular control arms with the Delrin bushings are great. I also bought the front end toe-in tool which worked out great.

|UPDATED|4/26/2026 4:01:11 PM (AZT)|/UPDATED|

Dewitt radiator and dual electric fans

Borgeson Steering box

1 person likes this post
Sign In to Like this post

Forum List New Topic Reply Search Hide Signatures

Replaced rear trailing arms project

Already a Member?

Not yet a Member?