Removing Power Brake Booster

Lifetime Member

Tisdale, Canada

Joined: 12/24/2013

Posts: 423

Vette(s): 1975 L48 Stingray 1992 LT1

ok, glad we have these forums. Have 3 nuts off the power booster and the push rod disconnected no way could I see that 4th one so had to double check to make sure there was a 4th. Back out I go to find that 4th, it is one of the lower ones that I haven't found. I did not find the first 3 to be that hard, but I have the seat out and I am only 5'4" so that would make it a little easier. you just have to get comfortable and hang your feet out over into the trunk area, my biggest problem was keeping my hair from getting tangled in stuff getting in and out. (I always seem to forget something I might need while I'm under there.) Here's hoping I can spot that 4th one. I too have progressive lenses so working in such close quarters has been quite challenging.

Be the first to like this post
Sign In to Like this post

SPONSOR AD:: (Our Sponsors help support Vette Registry)

Re: Removing Power Brake Booster

Posted: 11/24/14 3:13amMessage 12 of 21

crossfire1982

Free Member

Cramerton, NC - USA

Joined: 8/22/2006

Posts: 1094

Vette(s): black 1982 coupe slate gray interior, 350 crossfire, 1985 fuel pump, Steeroids R&P conversion

Cindy, I had to chuckle when I read the part about getting your hair tangled in stuff under the dash. That is certainly a problem that I didn't have; perhaps in my younger days but not now... Good luck with the 4th nut, it is lurking under there somewhere.

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/24/14 6:10amMessage 13 of 21

manchestershark

Lifetime Member

Click on image for full view

Equinunk, PA - USA

Joined: 10/31/2007

Posts: 2570

Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.

Been there, Done Three of them. I'll probably do more, but they ain't fun.

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/24/14 10:53amMessage 14 of 21

Adams' Apple

Lifetime Member
Moderator

Duncanville, TX - USA

Joined: 11/8/2003

Posts: 22715

Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/ Am-Fm/map light National/Regional/Chapter NCRS "Top Flight" #2-1985 Bright Red/Carmine Cp.L-98/auto Member: NCRS, NCRS Texas, Corvette Legends of Texas

2011, Mid AmericaC3Fest/C3VR Gathering.....parking lot repairs...dark...and here's Barb installing the little clip that holds the booster rod to the pedal. She was the only one in the group small enough to fit up in there, and by golly, she got the job done. Wink

There is always one nut that is a pita to get to. Patience, and some swivel sockets will help...and a bright light. Thumbs Up

Joel Adams
C3VR Lifetime Member #56
My Link

(click for Texas-sized view!) NCRS

"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/25/14 6:02amMessage 15 of 21

manchestershark

Lifetime Member

Click on image for full view

Equinunk, PA - USA

Joined: 10/31/2007

Posts: 2570

Vette(s): 1972 conv, 4-speed, 350, 200hp, numbers match, rally wheels, war bonnett yellow w/white top. good condition, nice driver.

And what a GREAT trip it was. The TEAM worked well together, and all problems solved.

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/25/14 7:51amMessage 16 of 21

dwa175

Free Member

leesburg, FL - USA

Joined: 7/19/2014

Posts: 222

Vette(s): 1979 coupe and now 2007 c-6

brake booster why are you replacing has some one checked doest seam to needed to change has someone confirmed this repair hold that wrench for a min fine out frist good luck just don't jump out the window frist dws175

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/25/14 1:28pmMessage 17 of 21

Lifetime Member

Tisdale, Canada

Joined: 12/24/2013

Posts: 423

Vette(s): 1975 L48 Stingray 1992 LT1

ok guys now I need some help. The ever elusive nut, higher right side, still haven't been able to locate it. I'm assuming the bolt pattern on the booster is equally spaced in a square or is the higher right side perhaps offset, tried getting fingers in there to feel around for it but still no luck. Doesn't help that the finger I smashed is on that hand and if anything even rubs it those little black words just sorta rush from my mouth.

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 11/25/14 1:41pmMessage 18 of 21

Lifetime Member

Tisdale, Canada

Joined: 12/24/2013

Posts: 423

Vette(s): 1975 L48 Stingray 1992 LT1

never mind all my fellow friends, I found a posting of a fellow who had step by step pictures of removal and a good picture of back of booster so I know where to look. Oh and I also solved the hair problem, found a nice thin touque to stuff it in and wha la no more hair caught in stick shift getting in and out

Be the first to like this post
Sign In to Like this post

Re: Removing Power Brake Booster

Posted: 12/20/14 5:54amMessage 19 of 21

Lifetime Member