Sponsored Content
Just replaced my PS Control Valve. Bit of a struggle to thread it all the way down, and I had to run a tap through the bolt hole, because I had buggered up my bolt trying to seat it before the hole was lined up.
It did remove a bit of the play in the steering, but I noticed that the bottom bearing on my steering gear box is worn, allowing the pitman arm shaft to wiggle side-to-side. Another day, another repair.
Steve
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
20111021145147r.jpg)
Corvettes and women are the same...You want to make love to them but they keep breaking down.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMCOPPERAS COVE, TX - USA
Joined: 7/6/2002
Posts: 475
Vette(s): 1972 corvette stingray convertible
2007 coupe
I have all the parts for the steering and it comes with free leaks, replaced everything with the Rack & pinion, best thing I ever did.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Be sure and drive it at different speeds and adjust as needed
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content