Sponsored Content
w
Need to know where I can find oil pressure hose for a 69. The one I am talking about is the one that runs from the engine to oil pressure gauge.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
r
Former Member
Send PMBladenboro, NC - USA
Joined: 1/22/2006
Posts: 1058
Vette(s): 1972 conv., sunfire yellow, blk interior, blk vinyl and convertible top. Off frame restoration with American Speed 383 stroker engine producing 500hp plus a 200hp NOS system. MSD ignition. Hooker super competition headers with chambered exhaust.
Ecklers have them. Item # A3845
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
m
Any local parts store should have this. I just replaced mine last weekend and got the hose and brass fittings from the local NAPA in the small town where I live.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
f
Lifetime Member
Send PMLawrenceville, GA - USA
Joined: 10/25/2002
Posts: 121
Vette(s): 1968 427 coupe and 96 LT4 six speed Gran Sport clone
Hi, this Flandy. I would recomend using some 1/8" nylon tubing, as it is way more flexible, and still works with compression fittings. You need some1/8 sleeve's or ferrule's. as they are called by some, and all you do is get the old metal line out and replace with the nylon. Clear is better in my mind as you can see the oil in it from yhe driver's side
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
r
I would advise you to order the "L" shaped fitting to put on the rear of the guage, it prevents the hose from crimping , if it does crimp it can burst crack and then you will have an oily mess. You can get this from eklers or zip corvette,rd
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content