Sponsored Content
Can you remove the oil pan without having to raise the engine or removing the steering linkage? C3 350 L82 motor.
Thanks
"Made to be run hard"
Simsbury, Ct.
20157284312r.jpg)
202332491413r.jpg)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22714
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
You will need to drop the steering linkage to get the pan off....no other way around it. It's not too much trouble, tho. You do not need to raise the engine at all. You do not have to completely remove the steering linkage, just disconnect it from the frame on the pass side, and the PS ram from the frame on the driver side, and let it hang.
|UPDATED|5/20/2019 12:07:10 PM (AZT)|/UPDATED|
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks, very helpful.
"Made to be run hard"
Simsbury, Ct.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content