Sponsored Content
S
Free Member
Send PMWindsor, Canada
Joined: 10/7/2002
Posts: 31
Vette(s): 1970 LS-5 T-Top Bridgehampton Blue / Bright Blue Vinyl
I went to buy a new dipstick & tube and everyone showed me a STRAIGHT one for a 454 Chevy bigblock. The one I am replacing curves under the block to the oilpan. Is mine wrong or are the car shops not showing me the right one?
'70 LS-5 Bridgehampton Blue
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
w
There were a few different tubes from the factory depending on the configuration of the vehicle the 454 was in. The straight aftermarket tube is meant to be bent to fit your particular application. You might be able to get a pre-formed one from one of the vette catalogs. Try www.riksvette.com or ecklers or midamerica.
There are also lots of other sites.
There are also lots of other sites.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content