Sponsored Content
r
69 coupe, no power stearing,,I took the top off of the steering gear box,,It had some blue lubricant left over in the bottom of the box,,I had put 90 weight lube into it,,and it ran out of the bottom like the Dutch boy peeeing, so i will suck out all the 90 wt. lube and the blue stuff,, my question is how do I pack the gear box with gear grease,,do I try and use a grease gun, or just wad it up ..rd
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
P
Strange... we just had this questions.. so I post one the better comments.
" manual steering the GM manual says to use GM #1051052 Steering Gear Lubricant (13 oz. containers) or any Steering Gear Lubricant which meets GM Specification GM 4673M, or its equivalent. Do not use EP Chassis Lube...Do not over-fill the gear housing. (This was taken directly from the GM Service Manual) "
I wished mine was as good as the above.. this will also stop in leak problems..
Phil
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Steering box greasing tool. This tool is designed for frequent greasing maintenance to insure longevity of the steering box. Part includes instructions. Non-returnable.
Paragon Number: 8581....$18.00 You can pack by hand or use this Zerk fitting bolt http://www.corvette-paragon.com/p-359613-steering-box-greasing-tool.aspx
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Or you can drill out your own bolt, tap it for the Zerk fitting then install the Zerk. That's a lot of work when it costs $18.00. Pack it yourself and save money.
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
This might be of interest to you guys...How to rebuild the steering box in a 1963-82 Corvette...http://www.corvettemagazine.com/2001/november/steering/steer1.asp
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I wish I would of had one of those bolts about a month ago, would of made my job a lot easier. I did'nt know that thing even existed
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I'm sorry for not mentioning it............I'll just blame it on ebo...........
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content