Sponsored Content
J
OK, Mr Dumbass again, I am not sure if I am just unlucky or keep making stupid mistake either way I need help again 
I have fixed my transmission problem with it being stuck in revers, I fixed my problem with not being able to get the clutch to function now I have another problem, when I removed the gearbox I removed the linkage i.e the lever and all that is attached to it, I did remove the small pin that prevent the lever from moving up and down and cleaned and re-installed it, but did not take it any further apart, now it is as if the gear lever has had too much to drink it just falls backwards 
also I cannot select gears, I can move it to the upright position but as soon as I let go it falls over (backwards), OK so obviously something is not lined up and peering down through the transmission tunnel does not make it any clearer, can anyone tell me what is not aligned and how to aligh it, I have a fear that I need to 'remove' the linkage and that is going to be a nightmare.
also I cannot select gears, I can move it to the upright position but as soon as I let go it falls over (backwards), OK so obviously something is not lined up and peering down through the transmission tunnel does not make it any clearer, can anyone tell me what is not aligned and how to aligh it, I have a fear that I need to 'remove' the linkage and that is going to be a nightmare.Ho HUM
Thanks
Gary
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
J
I fixed it 
, i thought about this problem all the way home and relized ther must be a slot that isn't lining up and moving the rods and level i got it all to line up.......yyyyyyyyyeeeeeeeeeeeeeeehhhhhhaaaaaa
, i thought about this problem all the way home and relized ther must be a slot that isn't lining up and moving the rods and level i got it all to line up.......yyyyyyyyyeeeeeeeeeeeeeeehhhhhhaaaaaaBe the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
I hate it when that happens!
Glad ya got it figured out! Don't be so hard on yerself...I've done worse...and will continue to do so...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Former Member
Send PMManteca, CA - USA
Joined: 11/20/2005
Posts: 3623
Vette(s): 1978,two tone,Metalic Rootbeer & gold
1975 L48 4 speed
Way to go Gary. Once you've rebuilt every part of your car it becomes easier to understand 
and there are fewer mysteries, then there's the electrical side .
and there are fewer mysteries, then there's the electrical side . Jimmy B.
Just can't wait to get on the road again. 
Click to see larger views!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
7
Free Member
Send PMYelm, WA - USA
Joined: 7/12/2007
Posts: 356
Vette(s): 1979 L82 4 speed Scat 383 crank 190 cc Procomp Aluminum Heads 202 160 stainless valves GM Powder metal rods Speedpro H860CP Hypereutectic pistons 280 cam hydralic HEI Pro comp 1.6 roller rockers Mighty Demon 750 Sanderson CC1AP Hedders.
If you ever want to make yourself feel smarter just come talk to me for a minute or two. I like to tell myself I'm getting good experience when I put stuff together 2, 3, 4, times and as long as you aint breaking the stuff your trying to fix your doing all right. 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
J
I think my car hates me !, if you check other posts you will see I am now having an oil pressure problem to deal with, maybe it knows I have to sell it once complete and it is doing it's best to prevent the sale.
Yes sad but true and worse thing is I do not want to sell it, also i have spent a fortune on this car which i will never get back, but a looming house purchase is forcing my hand, but I have sworn I will have another one before I leave this earth.
P.S. I still think this is the worst designed gearbox I have ever met and I have met a lot, Sorry Zora !!
Gary
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content