Sponsored Content
I am looking at a mini starter to replace the old starter, so far I can't see a downside and will make for extra room for headers. Is there a downside or something I need to watch out for
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Send PMSHELBYVILLE, TN - USA
Joined: 7/5/2002
Posts: 3944
Vette(s): 1976 L48 auto
1978 L82 4speed
1994 LT1 6speed
1978 L82 4speed
1994 LT1 6speed
only issue i had with the mini's(got one on the 78 and 76 vette) is that on the 76 it had to be shimmed for the flex plate... sometimes it still has a little issue when turning over. Somehow thinking that maybe the flexplate is slightly warped?... not sure, it doesn't happen enough for me to get overly concerned.... the 78 has a flywheel and never had an issue...and both cars have headers and the mini starter is much much easier to get on/off... without having to drop a header to remove a stock type starter....and takes the heat much better.....
StingrayJim 
NCM Lifetime Member #1936
Stingray's '76���������������������������� StingrayJr's '78���������������������������Lil Red '94 
(click each one to see a bigger version)
1 person likes this post
Sign In to Like this post
Sign In to Like this post
Other than losing originality, there are no downsides. Back in the day a significant percentage of starters needed to be shimmed, so not a big deal. Modern starters typically offer higher torque for high compression engine or hot starts.
-Mark
States I've visited in a Vette:
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
J
Which mini starter (brand and part #) did you use on your '78??
Thanks,
J
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMSHELBYVILLE, TN - USA
Joined: 7/5/2002
Posts: 3944
Vette(s): 1976 L48 auto
1978 L82 4speed
1994 LT1 6speed
1978 L82 4speed
1994 LT1 6speed
To be honest, i haven't a clue what brand they are.... i bought them at a local speed shop that is now out of business(nearly 8 years now). Best i recall they were built by another shop near Huntsville,Al..... never had a problem with them.... I'm sure most any mini from a reputable shop will perform sufficiently ....
StingrayJim
NCM Lifetime Member #1936
Stingray's '76���������������������������� StingrayJr's '78���������������������������Lil Red '94
(click each one to see a bigger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Lifetime Member
Send PMBelvidere, IL - USA
Joined: 10/24/2004
Posts: 440
Vette(s): 1977 Black T-Top ZZ4 5Sp 16in Wheels
Check out Jegs and Summit. Many name brands and prices.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Gold Member
Send PMScotch Plains, NJ - USA
Joined: 1/11/2006
Posts: 247
Vette(s): 1981 Corvette Coupe, Stock, Black on Black,
4 Spd
I am currently looking for a mini high torque starter on the usual websites mentioned in the posts and others.
The only one that Summit and I could find that fits the 81 is Summit's part #CSI-100SBP@$249+ My engine has a staggered bolt up, manual trans with 153 tooth flywheel.
The CSR part #100SBP starter will work with either
153 or 168 tooth flywheel/flexplate.
|UPDATED|2/28/2017 3:45:22 PM (AZT)|/UPDATED|
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Don't forget to wrap the starter with a heat shield of some sort, headers are tough on starters.
202010261047r.jpg)
DanT
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content