Sponsored Content
I had a brake stick two years ago, it also got pretty hot. To make a long story short, I replaced brake hoses twice, another mechanic changed the rear caliper, (not the one that got hot), many, many, brake bleeds, and a master cylinder it turned out the seals in the "hot" caliper were pouring out brake fluid. So I replaced that caliper and rotor, now all is well.
current
1977 Coupe
gone but not forgotten
1996 Grand Sport
1996 Grand Sport
1984 coupe
1974 coupe
1964 roadster
1974 coupe
1964 roadster
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Touch base with Larry and Mike at Corvette Specialties (be sure to tell them you're a C3VR member). I got a complete set of calipers and pads from them last summer for a fraction of the MAM cost. Also replaced all of the flexible hoses and eventually ended up replacing the master cylinder.
Unless you're planning on regular race track time I wouldn't go with the silicone brake fluid (DOT5). Regular fluid (DOT3) is all you need for normal driving.
Unless you're planning on regular race track time I wouldn't go with the silicone brake fluid (DOT5). Regular fluid (DOT3) is all you need for normal driving.
Jim Olson 
"The Toys"...!!! Save the Wave! 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
[QUOTE=Norsky]Touch base with Larry and Mike at Corvette Specialties (be sure to tell them you're a C3VR member). I got a complete set of calipers and pads from them last summer for a fraction of the MAM cost. Also replaced all of the flexible hoses and eventually ended up replacing the master cylinder.
Unless you're planning on regular race track time I wouldn't go with the silicone brake fluid (DOT5). Regular fluid (DOT3) is all you need for normal driving.
[/QUOTE]
ebo
Unless you're planning on regular race track time I wouldn't go with the silicone brake fluid (DOT5). Regular fluid (DOT3) is all you need for normal driving.
Truth, or Fiction ? .....I was told years ago that regular brake fluid keeps moisture from condensation and that silicone does not. Many years of storage rusted my internal parts of calipers and my mechanic said if you are to continue storage for this car you need to go to SS and silicone. He said unless I like replacing brake parts.
It has proven itself for me.
So does the silicone have more resistance to moisture? Or was he just blowing smoke
ebo
eboBe the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Silicon based brake fluids will not absorb moisture like "normal" brake fluid. The problem with the silicon fluids is compression....it will compress, unlike regular fluids, so the pedal will feel softer with the silicon fluids. The silicons will also tolerate higher operating temps.
If you don't really drive your car(s), except to shows and stuff, silicon brake fluids might be the hot ticket. It will certainly keep the rust bunnies away from the caliper guts.
If you actually get to drive yer cars regularly, I would absolutely stay away from the silicon fluids, and just flush the system once a year or so, so keep the fluid fresh.
If you don't really drive your car(s), except to shows and stuff, silicon brake fluids might be the hot ticket. It will certainly keep the rust bunnies away from the caliper guts.
If you actually get to drive yer cars regularly, I would absolutely stay away from the silicon fluids, and just flush the system once a year or so, so keep the fluid fresh.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I guess it really doesn't matter what brake fluid you use - moisture in the system, whether absorbed in the fluid or not, is going to rust brake inards. Flushing the fluid on a regular basis will get the moisture out.
Jim Olson "The Toys"...!!! Save the Wave!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMIndianapolis, IN - USA
Joined: 9/3/2006
Posts: 2461
Vette(s): Silver 1974 Convertible - L82 4 speed
Low miles (was only 8,900 when I bought it in March 2006) - Now 54K miles. Original owner bought it as an investment for son's college expenses.
2008 Jetstream Blue Convertible
[QUOTE=Crossfire1982]
Whew... I felt better after reading your post, from the title I thought we were going to have to scrape together bail money for you.
[/QUOTE]Chip, I haven't needed that kind of help since... Well, we won't get in to that now
UPDATE: The shop called me yesterday and told me that it was a hose. They got it replaced and I got the car back last night. Previously, it had been pulling to the right (the caliper that eventually locked up) for some time and now it's no longer doing that at all.
Not nearly as painful as I expected. Thanks for all the help and advice!
I wanted a Corvette my whole life, but I never dreamed of all the wonderful people I would meet because of it!
2014216132127r.jpg)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
All right! still got $$$ in the POT!!
ebo
eboBe the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Happy to hear it wasn't to painful!!! 
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
r
Glad it worked out. Now go enjoy it!
Scott
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content