Sponsored Content
Hey. Thanks for the info. I will check with the machine shop today and talk with my mechanic who installed the engine. They put a comp cam and comp magmum rocker arms. I will look at the paper work again to confirm. I do know the machine shop primed the engine before it was installed. Make sure the oil was circulated and checked the oil psi. On the first start up of the engine after it was installed is when the mechanic heard the tapping. I will tell him about the different gaskets . He probably knows. This all happened last night.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
FYI All I have used the following valve cover gaskets with success of raising the OEM short valve covers and aftermarket short valve covers to move valve cover up away from aftermarket roller rockers.They are as follows:
Fel-Pro #1603 5/16" thick
PRC VC 1603 5/16" " Procomp
AFR 1604 do not have thickness
Generally there is no problem with OEM Chevy Roller Rockers
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Correction of earlier message measurements should read
7/32" not 7/16" as the gaskets I am suggesting is Fel Pro and or PRC VC 1603 both of which are 5/16"...Sal C
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
New gaskets ordered. Hopefully this fixes the problem. Some minor tuning and tweaking of eveything and I should be good to go. Thanks to eveyone that commented. This was my first time at a major project on the car.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Excellent!
You never really said what Cam you went with, or what type of rocker arms. Just curious....
You never really said what Cam you went with, or what type of rocker arms. Just curious....
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
A COMP flat tappet cam was installed with COMP magnum tip rocker arms
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I finally got the info on the parts that were installed. 1 MK1099A engine overhaul kit..040 piston and ring set. 280H comp cam kit Comp magnum roller tip rockers.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Almost got the car ready to go. New gaskets installed. Engine sounds great. Need to do some small adjustments on the exhaust pipes. Now that everyhing is back together, the wiper door will not operate properly. When you start the car the door opens slightly and it will not go down. Trying to trace the system out and find the problem.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22716
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
That 280 is a nice cam. 
Wiper door popping up like that is usually due to low/no vacuum. Make sure the vacuum is connected properly to the engine source, and that you have the check valve in the line, and facing the correct direction. Single line side to the engine vac source, and on the dual line side, one line to the firewall/interior, and the other goes to the vacuum reservoir/tank, on the driver side fenderwell area.
Also...make sure the over-ride switch and push/pull knobs under the dash are all in the proper position.
Wiper door popping up like that is usually due to low/no vacuum. Make sure the vacuum is connected properly to the engine source, and that you have the check valve in the line, and facing the correct direction. Single line side to the engine vac source, and on the dual line side, one line to the firewall/interior, and the other goes to the vacuum reservoir/tank, on the driver side fenderwell area.
Also...make sure the over-ride switch and push/pull knobs under the dash are all in the proper position.
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks for all the info. Yeah, I have a couple of GM mechanics helping me trace out the system. I am not the original owner, and over the years people have bypassed some of the vacuum lines. Not the simpliest system!!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content