front spindles

I have begun the long arduous process of stripping every part and sanding and priming..

I disassembled the front spindles

and im cleaning them up

there is a rubber disc against the spindle support does anyone know the official name of this part ??

mine are pretty raggedy..

but im making progress I have most of the cross members cleaned up and primed.. and everything but the spindle supports in the front suspension.

does anyone need a serviceable fron bolt on crossmember.. for a 69.. you can have it for 5$+ shipping ?

Ben,
I think I know what you are talking about. There is a gasket or flat seal that goes between the brake dust shield and the spindle. Is that what you are talking about?

Most of the suppliers carry this piece.

I don't know what it is called either,but I did almost the same thing you did ,pressure washed the whole front end,sanded it down repainted it ,the A-frame bushings are almost brand new,I put in new sway bar bushings and new A frame to sway bar kits.plus new wheel bearings,I just took a screwdriver blade,and cleaned all the old grease off of that part in the spindle and applied fresh grease,I think its just a back up seal to keep a lot of junk away from the seal on the hub.don't know what you would call it

After Shark said: Ben, I think I know what you are talking about. There is a gasket or flat seal that goes between the brake dust shield and the spindle. Is that what you are talking about? Most of the suppliers carry this piece.

yes that is the part...

i just dont know what it is called..

mine is dry rotted around the edges and is soft and flimsy from grease in the center

Its called a brake splash shield gasket.

The corvette Central part number for this piece is 573046. It comes as a pair for $5.00. I'm sure other vendors have the same part as well.

Corvette America call is a backing shield gasket their part number is 33369, again $5 for the pair.

I had to buy these as well.

After Shark said: Its called a brake splash shield gasket. The corvette Central part number for this piece is 573046. It comes as a pair for $5.00. I'm sure other vendors have the same part as well. Corvette America call is a backing shield gasket their part number is 33369, again $5 for the pair. I had to buy these as well.

thank you sir, you are a gentleman and a scholar