Sponsored Content
I'm going to install (4) new rotors (drilled and slotted). On the fronts, do I need to drill out the rivets or do they press out? The rears already has the rivets removed.
(click to see a larger image)
"It Takes A Little Longer To Do It Right"
"It Takes A Lot Longer To Do It Again"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
f
Lifetime Member
Send PMLawrenceville, GA - USA
Joined: 10/25/2002
Posts: 121
Vette(s): 1968 427 coupe and 96 LT4 six speed Gran Sport clone
You still have to drill the rivets on the front to remove the rotors-Flandy
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Send PMDeBerry, TX - USA
Joined: 2/27/2002
Posts: 1006
Vette(s): 1971 383 Stroker- mille miglia red...5 speed
I just used a 7/16 drill to take off the heads, then just knocked out the rivets. Pretty easy.
I know the voices aren't real, but they have some pretty cool ideas... 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
P
Are you installing Baer Accelarotors, or another rotor?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I"ll get the set from Pro Rotors in L.A. 
(click to see a larger image)
"It Takes A Little Longer To Do It Right"
"It Takes A Lot Longer To Do It Again"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content