Sponsored Content
7
I will add that kit, looks like it would strengthin it up some with the studs and large washers. Thanks,many questions and pics to follow.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
2011111017209r.jpg)
Hear is another product for stabilizing your rear cross member. Removal of the cross member is required in order to install these items. If you are doing a some heavy wrenching anyway now would be a good time to install this low dollar up grade.
|UPDATED|10/13/2011 7:40:05 AM (AZT)|/UPDATED|
Cross Member Tabs____________$11.95
|UPDATED|10/13/2011 7:40:05 AM (AZT)|/UPDATED|
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
here is how they mount.|UPDATED|10/13/2011 7:41:32 AM (AZT)|/UPDATED|
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22715
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Wow Larry...I've never seen that particular upgrade. Kewl. Then again, I've never seen or heard of anyone ripping ou the holes in the crossmember, either! 
I guess it wouldn't hert to have them, anyway. 
I guess it wouldn't hert to have them, anyway.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Adams' Apple said: Wow Larry...I've never seen that particular upgrade. Kewl. Then again, I've never seen or heard of anyone ripping ou the holes in the crossmember, either! I guess it wouldn't hert to have them, anyway.
I guess it wouldn't hert to have them, anyway. Joel they're a cheap upgrade......$12.00...........Anything that can strengthen stuff I'm all for. I even istalled aircraft grade yokes in the rear axle...............
Manufactured From Aircraft Quality Steel
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
7
Where can I get the bushing and center mount upgrade kits
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
78Frank said: Where can I get the bushing and center mount upgrade kits
Frank here is a link for your bushings..............
http://www.ecklerscorvette.com/corvette-crossmember-cushions-rear-1963-1979.html
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Frank, here is a link for the center mount locating kit.............................................................
http://www.ecklerscorvette.com/corvette-rear-suspension-locating-kit-1963-1979.html
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Here is something else that I put on 
Carbon Fiber half shafts.
|UPDATED|10/16/2011 5:27:17 AM (AZT)|/UPDATED|
Carbon Fiber half shafts.|UPDATED|10/16/2011 5:27:17 AM (AZT)|/UPDATED|
corvette440hp
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content