Sponsored Content
No the car drives just fine until I come to a stop lite or sign. It just idles to down and stops,but restarts fine. The engine dosen't seem to be under any load. I am giong to check the distributor ,and see if the bushing is bad .while I have it apart I am going to change the modual(?).
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
C
Free Member
Send PMCleveland, GA - USA
Joined: 11/4/2007
Posts: 152
Vette(s): 77 xtreme project,80 project,and a 74 L48/auto white with blue interior!
It sounds like a locked up torque converter.imo
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
b
My vehicle acted the same way. Died at stop signs/lights. drove me nuts trouble shooting. Put it on a dyno and the guys picked it up right away. Could be the torque conv also.... just giving you my expereince.
good luck.
Bob
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I'm going to go with the group,I replaced the modual and the cap&rotor.It still not right,so the torque converter is next. The dealer said that it a disconinued part. And the parts store has so many different tpyes. Any suggestions(I not looking for any thing high preformace,just somthing that will make the car run well until I am able to change the motort out.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content