Sponsored Content
Sign Up To Join Us Now!
C
Free Member
Send PMCleveland, GA - USA
Joined: 11/4/2007
Posts: 152
Vette(s): 77 xtreme project,80 project,and a 74 L48/auto white with blue interior!
I've heard it could be done... but haven't seen it. Do any of ya'll know anything about it?Thx Ya'll
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Lifetime Member
Send PMGreensburg, IN - USA
Joined: 9/24/2003
Posts: 5388
Vette(s): Previous: 1984 Coupe, 1988 Maroon Coupe, 1989 Coupe, 2001 Roadster Present: 1967 Stingray Roadster, 1976 Stingray Coupe, 1989 Roadster..
INMO You would better of tryin ta put the C3 body on the C4 frame than going thru the pain of tryin ta swap out the brake and shock system of the C4. So much electronic gadgetry and so many brake lines to fool with it would just seem easier to me. Study the 82 model C3 suspension and make upgrades accordingly to what you want and work it from that angle. I think in the long run it will be easier, cheaper, and you will be equally as satisfied.
Tuxblacray: She's Back In Black! Check out my pics @ My Link 
(Click on image to see a bigger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22742
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
You can have your frame modified to use the C4 components, or you can also buy a complete, pre-modified frame. There are several places that do this now. Paul Newman Creations is one. It ain't cheap, tho... 
It's not something I would attempt to do myself, even tho I've done some weird stuff in the past...
It's not something I would attempt to do myself, even tho I've done some weird stuff in the past...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
7
A guy had one at the Eureka Springs show with at least the C4 front suspension. It was rough looking though. It looks like he did it himself with a hacksaw and baling wire.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22742
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
[QUOTE=71Shark]
Bubba? Shucks, Bubba ain't gots no hacky-saw...we-uns uses a smokin wrench!!!
A guy had one at the Eureka Springs show with at least the C4 front suspension. It was rough looking though. It looks like he did it himself with a hacksaw and baling wire.
[/QUOTE]Bubba? Shucks, Bubba ain't gots no hacky-saw...we-uns uses a smokin wrench!!!
Joel Adams
C3VR Lifetime Member #56
My Link
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
C
Free Member
Send PMCleveland, GA - USA
Joined: 11/4/2007
Posts: 152
Vette(s): 77 xtreme project,80 project,and a 74 L48/auto white with blue interior!
Well considering the the 77 is getting a supercharged 6.0 LS2 with a tremec T56. I was figuring it might as well have the susp. to go with it. I said it was an Xtreme project.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
G
Lifetime Member
Send PMJoined: 9/8/2005
Posts: 241
Vette(s): 1980 with a Banks Twin Turbo
1969 Convert Big Block
1996 Grand Sport Convert
As mentioned above there are several People who do the Conversion. If You go with one of the Aftermarket Frames there is a Possiblilty that Your State may Re Classify Your Car as a Kit Car. If You go with one of the ones who modifies a Stock Frame then it won't be a Problem. Of coarse it probably won't become a Problem anyway unless Cruise the DMV and point it out to them. That being said I would think the Aftermarket Tube Frames would be Stiffer and therefore Handle better. The C4 Rear is Narrower than the C5 so it fits better without using Fender Flares. Unless You want Flares. The Front end the C4 A Arms are Forged and the C5's are Cast. That being said most people feel that newer is better. Most of these Vette Rods have been built on C1 and C2 Bodys but the C3 is allmost the same thing as a C2. Richard....
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
S
Former Member
Send PMFayetteville, NC - USA
Joined: 2/13/2005
Posts: 244
Vette(s): 1968 Corvette Convertable, 4 spd, 350 SB, Daily Driver
Check out this link, they specialize in new frames made to use C4 suspension components.
StreetShark 2007-11-06 04:19:57
Also, http://www.sriiimotorsports.com/ , they build tube frames that accept C4/C5 suspension components that your C3 body will bolt right on to. The frame is expensive 10K I think was the price with C4 parts.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
C
Free Member
Send PMCleveland, GA - USA
Joined: 11/4/2007
Posts: 152
Vette(s): 77 xtreme project,80 project,and a 74 L48/auto white with blue interior!
Thank ya'll for the info. As for the Kit car reclassify, We don't even have emmissions here and I can do pretty much anything as long as i don't remove the Vin from the orig location. I love GA!LOL! thx again for ya'lls help.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
C
Free Member
Send PMCleveland, GA - USA
Joined: 11/4/2007
Posts: 152
Vette(s): 77 xtreme project,80 project,and a 74 L48/auto white with blue interior!
I talked to Tray waldon @ street shop inc today. They're makeing me a frame for my 77. I just have to take them my GS susp and they are modifying the rear for free and adding my front to the frame so i'll have a full rolling C3 chassis with full C4 susp and brakes. Thx for ya'lls help.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content