Home page

Back from the machine shop

Forum: C3 Engines, Driveline and Handling

14 Messages
Page 2 of 2
Share:
Sponsored Content

Already a Member?

Welcome back! Access your account.

Sign In

Not yet a Member?

Join our community! Registration is free.

Join Free

Back from the machine shop

Posted: 6/28/11 5:48amMessage 11 of 14
Profile Pic
Lifetime Member
Send PM
Temple City, CA - USA
Joined: 10/3/2010
Posts: 365
Vette(s): 1969 Daytona Yellow. 350 / Automatic.
Daveo76, here's a link I've been saving in case I ever rebuild an engine.  He seems to be pretty thorough and has lots of pictures.  Maybe it will help.  Good luck with the rebuild and keep us posted.

http://www.corvette-restoration.com/restoration/corvette_restoration_updates_engine_transmission.htm



Jim
Be the first to like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)

Back from the machine shop

Posted: 6/28/11 11:23pmMessage 12 of 14
Profile Pic
Free Member
Send PM
Vancouver, WA - USA
Joined: 8/25/2005
Posts: 869
Vette(s): 1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Thanks for the link, eldredjames.  Looks like that's a big block, though?  Might be useful for some general info, though.  

Joel, thanks for the clarification.  I just went out and checked to make sure - the 062's I'm using have three tapped holes on both sides.  The familiar 3 hole pattern on one side and a slightly different 3 hole pattern on the other side.  My original 882's have the one of those same 3 hole patterns, but on the other side they just have one hole that I don't think was used for anything.  But in any case - it appears as if there is no way I could install the new vortecs wrong - the correct three hole pattern will be in front on the driver's side (alternator) and in back on the passenger side (lifting lug).  I will, however, run bolts in those holes before installing to make sure everything's kosher....  Thanks again for all the info.  

 

1976 Silver/Firethorn.  L48, 4spd.  Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Be the first to like this post
Sign In to Like this post

Back from the machine shop

Posted: 7/1/11 12:15pmMessage 13 of 14
Profile Pic
Standard Member
Send PM
macedon, NY - USA
Joined: 7/20/2006
Posts: 367
Vette(s): 68 COUPE 454 HAS MOTION HOOD SCOOP, REVERSED GILLS ZL-1 FENDER FLARES AND MOTION REAR SPOILER, LEMAN'S GAS CAP, BUCKET HEADLIGHTS. CAN-AM FRONT RACING SPOILER. CHROME HOOKER HEADERS AND SIDE PIPES! 4 SPEED M20, LOOKS FAST STANDING STILL !!
Hey Dave,
cool you want to do the engine yourself.
I also wanted to do mine too. I ended up working with the machinist and helped him put it together. He showed me what to do.  My engine ,454  .030 over, was  balanced and blueprinted.
I did let him do all the bearing tolerance specs and anything critical. I assembled the heads, put all the pistons and rings in, with him showing me how to position them to get the least blow by.
By doing this he knocked off a bunch of his labor costs and I still got to have a part of engine assembly.
You said your machinist is willing to help, why don't you ask him if you could do the same as i did?
hope this helps!
Joe

Be the first to like this post
Sign In to Like this post

Back from the machine shop

Posted: 7/2/11 9:10amMessage 14 of 14
Profile Pic
Free Member
Send PM
Vancouver, WA - USA
Joined: 8/25/2005
Posts: 869
Vette(s): 1976 Silver/Firethorn. L48, 4spd. Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Thanks for the suggestion, 68vet427 - I'm definitely going to have him check things out for me, but it might be a little bit later stage.  He's already balanced everything and hung the rods and assembled the heads, so I'll put the rotating ass'y in and the cam and then bring it to him to degree the cam and ask him to perform some of the clearance checks.   Then I'll bring it home and put the heads on and all the other stuff.  I'll probably rely on my books and video for piston ring placement.  (and my neighbor).  Your project is looking good -- took a look at your pics.  

 

1976 Silver/Firethorn.  L48, 4spd.  Original 2 bolt, vortec heads, 9.4:1 CR, Speed Pro Cam: 224/224@0.050, 112 LSA, Eagle Steel Crank.
Be the first to like this post
Sign In to Like this post
Share:

in Forum: C3 Engines, Driveline and Handling


Sponsored Content