Anyone installed a generic tilt steering column?
Forum: C3 Engines, Driveline and Handling
3 Messages
Page 1 of 1
Sponsored Content
I would like to change my straight steering column to a tilt one on my '75. Used ones are almost impossible to find, and then are way too expensive.
I see ads for generic tilt steering columns for around $250.00, They say "need some adapting to fit" but don't go into detail of what this "adapting" involves.
Has anyone used one of these 3rd party steering columns in your Vette? If so, how extensive are the required modifications?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Bill, never installed a generic T/T column, but one other option you might consider is a later C3 T/T column (76+). They are available, a bit cheaper and can be installed with some minor modifications. Do a search for T/T info by a gentleman named Jim Shay (or Shaw). I believe he has an article on installing a later column into earlier C3’s. Never done it myself, just another possibility to consider. Good luck and let us know if you go that route.
John Sigmund

valkman57@sbcglobal.net
NCRS Member 61302
NW NCRS Chapter Member

Duct tape is the new Black !!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
k
I installed a Flaming River
https://www.summitracing.com/parts/fla-fr2003vtss/overview/year/1968/make/chevrolet/model/corvette
many years ago it cost $600.00 then & I've never had a problem. One of the best mods I've done. Had to make my own brackets back then , but I'm pretty sure they have them now. Makes a big difference in handling & much safer
Alan
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Engines, Driveline and Handling
Sponsored Content