Sponsored Content
V
Hello,
Victor's70 2007-02-10 19:11:32
If anyone has any advise to my problem I would greatly appreciate it before I pull my hair out.
Here is the issue: I rebuilt the motor, and then the wipers don't work...but they did before. I replaced the wiper motor and wiper switch, no improvement. I purchased a new wiring kit from the firewall out...found the missing connection to the starter (wire must have broke off with pressure washing) to allow the wiper motor to be a positive ground. Still no wipers.
Here is the kicker, when I turn the engine off and take the key out, it keeps running unless the heater blower motor switch is off (the blower motor doesn't work either). I then took out the consule and removed the blower motor switch, and the car turns off just fine....but still no wipers or blower.
I checked the power at the wiper motor, the single black wire has power. I checked the cut off switch under the dash and it seems to operate.
Any Ideas?
Victor Withers
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
R
Welcome, did you see the post on wiring diagrams? I am not one of the experts here, we have many, and someone very soon is going to tackle this question does youe wiper door open all the way? that is an on going issue with my vette. I believe I have that wiring diagram sent to me, if so I will try to forward to you, I sometimes have to go to Yakima for a 2 day meeting, will keep you posted, maybe we can have dinner.
Larry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Larry,
Norsky 2011-01-14 20:29:54
The wiper door will open all the way with the override switch.
I really appreciate the help. If you are in Yakima, please let me know by contacting me via e-mail or private message.
Victor
(modified by request - Norsky)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Moses Lake, WA - USA
Joined: 4/16/2005
Posts: 2134
Vette(s): 1976 L48 4-spd, Mahogany Metalic exterior, Buckskin interior 350ci/350hp, 3rd owner, fiberglass spring, 255/50-16's Torq-Thrust II
I spent some time studying my 76 elect schematic and an earlier schematic in the Corvette manual. The black wire to the wiper motor is spliced into the black wire for the blower motor. This is a ground wire and from the schematic indicates it attaches to the starter some where. Here is what I think is going on. If you attached the black wire to the positive post on the starter solenoid then you are back feeding 12v through the blower motor. The voltage then travels along the positive wire for the blower motor (orange wire). Then to the blower switch. Travels through the blower switch out the brown wire to the fuse block. Then out the fuse block to the ignition switch and then out the ignition wire to the coil. So try and disconnect the black wire from the starter and see if it works.
Also if you and Larry are getting together for dinner let me know and I will drive over. I am out in Moses Lake.
Good luck with your trouble shooting
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I think Suncountry hit on the head!! I made a similar mistake when I put the engine back in my 77. I had that black ground wire on the positive post on the starter. My wipers would not work and the turn signals worked even with the key off/out. That ground wire was supposed to go to one of the transmission mounting bolts on that side. It was one I didn't mark, thought it would be obvious
!! Thing is I waited 2 years to put the engine back in!! I can't remember what I did last week let alone 2 years ago. I was looking an expoded view of that area in the assembly manual one evening and there it was
!! The next day I took it off the starter and mounted it back on the trany mount and bingo everything back to normal
!!
!! Thing is I waited 2 years to put the engine back in!! I can't remember what I did last week let alone 2 years ago. I was looking an expoded view of that area in the assembly manual one evening and there it was!! The next day I took it off the starter and mounted it back on the trany mount and bingo everything back to normal!!
Hope this is it!! Bad part is about 6 months later my wiper motor quit, guess I toasted it a bit 
!! Oh well, live and learn!!
!! Oh well, live and learn!!Good luck!!
Mel
Lifetime Member #90 
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Thank you both, I will give it a try. If either of you are in town, please feel free to email at withersv@hotmail.com I love corvettes and any reason to gather is a good one.
Norsky 2011-01-14 20:32:00
Victor
(modified by request - Norsky)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Hello Everyone,
I wanted to say thank you to everyone for all your help and now everything works. Joel, the wiring schematic was a great help after I took some time to really look at it.
Suncountry and Karmel77 was correct about the wire by the starter, I moved it to a ground, just like on the schematic. The only problem was I fried the blower motor by putting positive to both sides and shorted the blower switch….leading to the run on problem. After replacing everything (I went ahead and replaced the wiper motor, wiper switch and wiper relay for good measure) and correctly wiring it, everything works great!
After taking the cernter console out to get to the relay, I have came to conclusion that whom ever did the engineering didn't plan on any working on the car...lol.
Thank you again,
Victor
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
O
Hey Victor;
Glad you got to the bottom of it!
Adam will tell you if he sees it that there are search sniffers that look at our site (I guess to keep us active on the search engines) so it is best to send your contact info (email and phone #'s) thru a Private Messenger Message or Instant Message. This protects you from potential bad stuff.
If you need further info, I'm sure Adam can fill you in.
Glad you got to the bottom of it!
Adam will tell you if he sees it that there are search sniffers that look at our site (I guess to keep us active on the search engines) so it is best to send your contact info (email and phone #'s) thru a Private Messenger Message or Instant Message. This protects you from potential bad stuff.
If you need further info, I'm sure Adam can fill you in.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Thank you Dennis, I didn't give it any thought until now. I appreciate the info.
Victor
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Victor,
Glad to here your back up and all is working as designed
!! Isn't that just the best feeling!!! Happy cruising
!! Isn't that just the best feeling!!! Happy cruisingMel
Lifetime Member #90
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content