Sponsored Content
Sign Up To Join Us Now!
R
Hey guys! I added the ground wire from the wiper switch to the mounting screw and it did not fix the problem. Could there be a loose ground wire or dirty terminal under the dash?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Check to see if you have power coming from the wiper motor to the switch. You could have a bad connection somewhere along the line. Also check to see if the same color wires have power coming out of the motor. One wire will have power going to the motor when the ignition is on. If you have power anywhere, that's okay, but you could have lost the power supply altogether. Keep in mind a very poor connection will show voltage when the circuit is not operating, but when turned on it could drop to almost nothing.
On the "Tail of the Dragon"
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
(some day, no strike that, October 2008 it turned red, still in progress!)
(click either image to see a bigger version)
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content