Sponsored Content
I'm trying to adjust my wiper door to fit close to the body in the closed position. Mine sits too high for some reason. I have the spacers in place. Is there something else I should be looking at or adjusting?
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
I had the same problem and found out that I had the wrong windshield wipers. I had put on a new modern pair and learned that the originals are much smaller. The newer ones would not let the door close all the way. Once I put a correct pair on, the problem was solved. Maybe your issue is a simple as that? BlueX2 2010-04-26 22:20:35
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Thanks. I'll check it out.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
V
Former Member
Send PMMounds View, MN - USA
Joined: 5/24/2007
Posts: 1034
Vette(s): 70 LT1 coupe, 69 350 HP coupe, 69 390HP 427 coupe, 71 LS5 convert, 85 coupe, 93 coupe
If you don't have something in the way, there are two adjustments. First, there are stops in the outer corners of the transmission that hit on the cowl. There is quite a bit of adjustment there. Also, the entire assembly is adjustable where it bolts to the firewall, including the ability to shim it forward or backward as needed.
Larry
Larry
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content