Sponsored Content
Hi Listers
I need some help with trying to repair my swindshield wiper motor on my 68 - the wiper switch does nothing - just makes a clicking sound in the dash - (relay?)
when the wiper door sitch makes contact the motor runs - even with the switch off and also when the 3 wire flat connector is plugged in it gets hot ? Is there any information out there that shows what the wires do and a way to meter out the motor unit ? thanks Mike Duffy
I need some help with trying to repair my swindshield wiper motor on my 68 - the wiper switch does nothing - just makes a clicking sound in the dash - (relay?)
when the wiper door sitch makes contact the motor runs - even with the switch off and also when the 3 wire flat connector is plugged in it gets hot ? Is there any information out there that shows what the wires do and a way to meter out the motor unit ? thanks Mike Duffy
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
l
Former Member
Send PMCOLUMBUS, MS - USA
Joined: 1/11/2004
Posts: 331
Vette(s): 1972 Coupe; 350 4-speed with GM sidepipes;
Classic White/Saddle
Had a similar problem with mine about a month ago. Had been fixing a minor gauge cluster problem and afterward had wiper issues. With switch on, the wiper door would open, but no movement of wipers. If I pushed wash, wipers would cycle once and then park. Turns out I had accidentally flipped the three-wire flat connector. Try flipping yours over and see if that solves anything.
John
John
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content