Sponsored Content
My wipers quit working, troubleshot down to the motor being bad. No problem, pulled the motor and went to vendors and found a price of $175.00 !!! Called Napa, in stock $67.00. I am sure all are rebuilt by the same re builder, how can they justify that price? Just because it's for a Corvette? Sorry for the vent, I would like to patronize our vendors but refuse to pay more than double the price for the same part!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
Todd, where they both rebuilt's?
If so something does not seem right.
eboBe the first to like this post
Sign In to Like this post
Sign In to Like this post
R
You see that a lot,I get my parts locally whenever I can.no offense to our sponsors,but seems like just because we own Vettes,everybody thinks we got money comin out our A$$, 
C3VR Lifetime Member #93
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22718
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
Actually, they are rebuilt by several different places, depending on your location.
Most of the larger Corvette vendors prolly use the same reman companies, but places like NAPA, Pep-Girls, etc, don't use them...they have their own sources. They also sell more of them(think volume), so their price is lower to start with.
Another thing is, parts from a Corvette vendor might also be a little better quality, both in performance, and cosmetically...just an observation.
If you(or anyone, for that matter) are not trying to keep your car as stock/factory as possible, then the NAPA motor will function, and fit(theoretically) just fine, so there's really no need for the high $$$ repro parts.
Most of the larger Corvette vendors prolly use the same reman companies, but places like NAPA, Pep-Girls, etc, don't use them...they have their own sources. They also sell more of them(think volume), so their price is lower to start with.
Another thing is, parts from a Corvette vendor might also be a little better quality, both in performance, and cosmetically...just an observation.
If you(or anyone, for that matter) are not trying to keep your car as stock/factory as possible, then the NAPA motor will function, and fit(theoretically) just fine, so there's really no need for the high $$$ repro parts.
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Former Member
Send PMManteca, CA - USA
Joined: 11/20/2005
Posts: 3623
Vette(s): 1978,two tone,Metalic Rootbeer & gold
1975 L48 4 speed
Sounds logical to me. I've returned starters, alternators and such several times (per puchase) to Napa, before getting one that's satisfactory. I still shop there, I just try to be careful what I buy
. Someone needs to check into quality control 
.
. Someone needs to check into quality control .Jimmy B.
Just can't wait to get on the road again. 
Click to see larger views!
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content