Sponsored Content
O
Anyone have any advice on re-mounting a new window sweep on the door skins?
It is currently stapled on with monster staples. 71Shark and I thought a small rivet with a washer would be the best way to attach the new ones. They don't come with staples, instructions or holes that would give you a clue.
This isn't an NCRS type install so any ideas/thoughts or things that have worked are most welcome!
Thanks,
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
You can buy a clip of the staples from some of the vendors, about $5(plus shipping
). Bend them over by hand. Use the old sweep as a template to poke holes in the new one to line up with the holes in the old(?) door panel. But the rivets should work, too.
). Bend them over by hand. Use the old sweep as a template to poke holes in the new one to line up with the holes in the old(?) door panel. But the rivets should work, too.Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Sorry, but I have to ask, what is a window sweep?
Is it like a chimney sweep?
Or does it wipe the winder clean when she goes down?
Save the Wave!
Support the National Corvette Museum
Support the National Corvette Museum
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
R
Otherwise known as WHISKERS ,
C3VR Lifetime Member #93
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content