Sponsored Content
20111021145147r.jpg)
I am replacing the vacuum lines and I have the lines installed to the light switch and the override switch. I have 1 large line coming in from the fire wall and heck I f I know where it hooks up.
Looked in the aim book but it does not seem very clear. So I need a point in the right direction and possibly some clear diagrams. I am thinking it is for the heater/vent control system but I am not sure.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
d
Do you have Cruz control? If so, there is a switch on the brake peddle that is hooked up to vacume to disengage CC.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
Lifetime Member
Moderator
Send PMModerator
Duncanville, TX - USA
Joined: 11/8/2003
Posts: 22720
Vette(s): #1-1974 L-48 4spd Cp Med Red Metallic/Black deluxe int w/AC/tilt/tele./p/w-p/b/
Am-Fm/map light National/Regional/Chapter NCRS "Top Flight"
#2-1985 Bright Red/Carmine Cp.L-98/auto
Member: NCRS, NCRS Texas, Corvette Legends of Texas
I'm thinking all of the HVAC hoses come in from the passenger side of the firewall...
Daniel may be on the right track, iffin you car has CC...
Daniel may be on the right track, iffin you car has CC...
Joel Adams
C3VR Lifetime Member #56 
My Link 
(click for Texas-sized view!) NCRS
"Money can't buy happiness -- but somehow it's more comforting to cry in a CORVETTE than in a Kia"
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
I will check it out this weekend. On my way to the car in about 2 hours.
Thanks DB
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content