Sponsored Content
Two weeks age before going to Cruis I notcied my inspection sticker was expired so I followed the wife to get it inspected. three miles from home I noticed the pasenger side brake light and turn signal suddenly stopped working, we went to the inspection station where I took off the lens cover and checked the bulb after reseating the bulb the lights worked fine. Now I notice the passenger side tuen signal comes on but doesen't blink (the drivers side works fine. Need suggestions! 

Annicorvette
Lifetime member # 35
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
SPONSOR AD:: (Our Sponsors help support Vette Registry)
If the rear light comes on and does not blink, check the front bulb. See if it's working.
The turn signal blinks due to the amperage flow throught the flasher. It's like a circuit breaker. It gets hot, trips off, cools and trips back on.
When it does not have enought current flow, it won't blink. Low current flow is a burned out bulb, or dim bulb due to poor connection, or no light at all due to bad connection or switch.
The turn signal blinks due to the amperage flow throught the flasher. It's like a circuit breaker. It gets hot, trips off, cools and trips back on.
When it does not have enought current flow, it won't blink. Low current flow is a burned out bulb, or dim bulb due to poor connection, or no light at all due to bad connection or switch.
Be the first to like this post
Sign In to Like this post
Sign In to Like this post
in Forum: C3 Electrical, Body and Interior
Sponsored Content